0
An accelerometer can be mounted on the surface of the machine which will measure the vibrations acceleration this is usually integrated to velocity for the purposes of analysis. Velocity is usually measured in mm/s (millimeters per second) or IPS (inches per second) in the US) while acceration in usually measured in G (9.8 mm/s/s). To convert between vibration acceleration, velocity and displacement you can use the following free tool from vibronurse the link is (http://www.vibronurse.com/cmcalculator.html). The alternative method is to use proximity probes (which uses an eddy current coil) these will normally be fitted to the machine by the original manufacturer.
What else can I help you with?
How do I figure out what size rotary phase converter I need?
To figure out what size rotary phase converter you need to figure out what type of equipment you have, how difficult is to start, and the AMP requirements of it. With this knowledge you can go to any company that sells rotary phase converters and figure out which one you need. http://www.rotaryphaseconverter.info/selectingrightsizerotaryphaseconverter.htm
How would you describe vibration?
mainly two types of Vibration measurement: shaft vibration Bearing Vibration
What is a rotary motion?
That refers to something that moves around in a circle.
How can wire up the voltmeter to measure 3 phase supply without rotary switch?
There are only two ways this can be accomplished. The most economical way to measure three phase voltages is with one meter and a rotary switch, that has an off position, to connect the one meter to each of the three phases one at a time. The other approach is to have three volt meters connected to each phase to measure each phase individually. With the three meter approach you will still need a switch in each meter so that the meter can be taken out of the circuit when no reading is needed.
How much would rotary couplings cost?
Unfortunately, the answer to that question is difficult to come by without knowing the location and use of the rotary couplings. The answer could be anywhere from $200-$2000. Please specify use for rotary couplings.
Where could I purchase rotary seal equipment near Tuscon?
Have a look at www.rotaryproductsinc.com/. The offer many types of rotary seal equipment.
What type of operating equipment does a rotary rig use?
The operating equipment of a rotary rig can be divided into three systems: hoisting, rotating, and circulation.
Is the average a measure of center or a measure of vibration?
It is a measure of the centre.
How does someone acquire vibration test equipment?
You can acquire vibration test equipment either directly from the manufacturer or alternatively from scientific sales stores such as 'Data Physics' or 'M B Dynamics'.
What is the purpose of vibration isolators?
Vibration isolators are used to reduce the transmission of vibration and noise between two objects or systems. They help to protect sensitive equipment from damage caused by unwanted vibrations, and also improve the overall performance and longevity of the equipment.
What measures vibration?
An accelerometer measures vibration.Acclerometer and vibrometer are the instrument used to measure the vibration of the any object.Accelerometers
Which companies produce top quality vibration testing equipment?
E-Labs out of Frederiksburg, Virginia produces testing equipment and environments for vibration testing. These options are generally considered by seismologists to produce high quality, top of the line results and equipment.
What measure the amount of particles vibration?
wave length
Will the victaulic coupling dampen the vibration from the source equipment?
The Victaulic system will dampen a small amount of the vibration from the source equipment due to the type of connection it is, pulse and axial forces due to the displacment of the product or the action of the delivery equipment or just the expansion of the piping will not be dampened. I believe there are fittings available to address the problem of vibration transfer. cheers
What is the purpose of an accelerometer?
to measure the vibration or accelerationof motin of a structure
How do measure or observe ductility?
you can measure the ductility by tapping it with a rock several times then feeling for vibration
How can one measure the frequency of vibration accurately?
One can measure the frequency of vibration accurately using a device called a frequency counter. This device counts the number of vibrations per second, known as hertz (Hz), to provide an accurate measurement of the vibration frequency.
