result of output characteristics of npn transister in CB mode
Transistor=Transfer+Resistor. When Transistor operates in active region its input resistance is high and output resistance is low. So,We can consider transistor as a device which transfers its resistance from high to low. And by this property transistor amplifies input signal.
They use transistor as the purpose to transfer the voltage
Transistor is a semiconductor device used for amplify and switch electronic signals and electrical power. It is composed of semiconductor material with at least three terminals for connection to an external circuit.
The operating point of a device, also known as bias point or quiescent point (or simply Q-point), is the DC voltage and/or current which, when applied to a device, causes it to operate in a certain desired fashion. The term is normally used in connection with devices such as transistors and diodes which are used in amplification or rectification.
Basically, in transistor, the signal is transferred from low resistance circuit to the high resistance circuit. So it is called transfer+resistor=Transistor.Transistors are widely used in different types of switching, amplifiers, oscillators and integrated circuits.Based on the applications, the types of the transistors are as given below:General purpose transistors, Low frequency transistors, High frequency transistors, Power transistors, Switching transistors, Field Effect Transistors, MOSFET, Uni-junction Transistors, Bi junction transistors, Photo transistor, High power transistors, Complementary pair, Darlington amplifier, Video and R.F. amplifier, Ultrahigh frequency and microwave, Insulated gate bipolar transistors, Static induction transistors.More their to know about transistors are as given below:History of invention, Time-line throughout, Basic construction, Bias arrangement, working, Various currents in transistors, Basic transistor amplifier, Configurations, Characteristics, Current gain and relation among them, D.C. load line, Operating point, Biasing of transistor, stability factor, specifications and ratings, testing, colour coding, identification of transistor using multimeter, h-parameter of transistor, particular applications etc...
the name itself we can say that the transistors are used to transfer from low resistance to high resistance.
The fullform of transistor is transfer resistor.
transistor. This word is a blended form of transfer of resistor. The legs of transistor (collector, emitter,base) transfer the resistance. So it is called as transistor
Transistor stands for "Transfer Resistor". (Resistor of transference)
Transistor=Transfer+Resistor. When Transistor operates in active region its input resistance is high and output resistance is low. So,We can consider transistor as a device which transfers its resistance from high to low. And by this property transistor amplifies input signal.
transfer : tran-resistor : -sistorThus tran-sistor or just transistor.
transistor
as the name suggest transistor means to transfer resistor, it is an electronic device,
A: The characteristic will be the same as DTL RTL TTL the logic will not change but the transfer function for each family is certainly different
They use transistor as the purpose to transfer the voltage
Transfer and resistor
What?In May 28, 1946, a survey conducted by Bell Labs offered “a discussion of some proposed names”Among them was "transconductance/transfer varistor".So the question repeats the common mistake that it was "transfer resistor".