0
Yes of course!!
10 kva electrical power is 10 kva electrical power either it would be three phase or single phase. But other factors i.e. current, voltage changes accordingly.
Actually this question is quit confusable. Because in 3phase system, if each phase gives 10kva power (single phase power = 10 kva) then 3 phase power will be 10 X 3 = 30 Kva
If we go leteratualy towasrds the question, then the asnwer will be - No. becasue 10 kva supply to 3 phase load will be 3phase supply(i.e440V) & 10kva supply to single phase load will be single supply (i.e 250V).
What else can I help you with?
Is there a difference between three phase and single phase electrical supplies?
Yes, there a difference between three phase and single phase electrical supply services.
Can 3 phase be changed to single phase on the Hobart mixers?
You will need a phase converter. Avaliable at an industrial supply company like granger supply
How do you calculate 3 phase load from single phase values?
If you have three adjacent houses each with a single-phase supply taken from different phases in a three-phase cable in the street, the total power is equal to the sum of the powers in each of the three phases.
Can you run a three phase motor with single phase generator with help of phase converter?
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
Can you convert a single phase power supply into a three phase stabiliser to power a home?
Houses generally run on single phase power. It would not make sense to convert single phase to three phase to run a house. Please restate the question.
When would a three phase supply be preferred over a single phase supply?
Bcoz in single phase if supply is interrupt or any trouble there is no power .but in 3 phase if 1phase supply gone we can manage it by other 2 phases
Can you give single phase supply to three phase device?
No.
What is typical single phase voltage in Canada?
The standard nominal voltage in Canada for a single-phase residential supply is 240/120-V split-phase supply.
Can a single phase supply be used in a three phase supply?
No, a single-phase supply cannot be directly used in a three-phase system. The voltages and phases are different, so additional equipment such as a phase converter or transformer would be needed to convert the single-phase supply to match the requirements of the three-phase system.
How do you start a three phase motor to a single phase power supply?
You don't. A three phase motor will not start unless it is connected to a three phase supply.
Is 3 phase motor run on 1 phase supply?
No. That would be a single phase motor.
Is there a difference between three phase and single phase electrical supplies?
Yes, there a difference between three phase and single phase electrical supply services.
Is a 2 phase supply the same or equivalent as 2 single phase supplies?
Not necessarily. Two single-phase supplies could be supplying the same phase, which means you don't get the same range of voltage options you get with a true two-phase supply.
What is the voltage and current for a single phase supply?
240v
Can 3 phase be changed to single phase on the Hobart mixers?
You will need a phase converter. Avaliable at an industrial supply company like granger supply
How do you calculate 3 phase load from single phase values?
If you have three adjacent houses each with a single-phase supply taken from different phases in a three-phase cable in the street, the total power is equal to the sum of the powers in each of the three phases.
How do you size wire for 3 10kva single-phase 480v-240120 transformers fed from 3-phase 480v wye 1st 10kva 2000ft on A-B 2nd 10kva 3000ft on A-C 3rd 10kva 4000ft on B-C?
Do you really think you'll get a reliable answer from faqfarm about this? Like there's some electrical engineer who wants to do some calculations for you for free? Your question is a joke. It should be answered by your electrical contracting firm's QUALIFIED PERSON. If you're the firm's qualified person, you might want to reconsider a few things. Like how often you update your training and familiarity with the NEC. If your question is a test/joke, consider your experiment over.
