See here for conversion calculator
http://www.chapelsteel.com/ksi-mpa.html
Tensile strength is given in ksi. To get pounds you need to know the area. Pounds = strength x area. For example if the specimen is 100 ksi strength and area 1 sq inch, pounds = 100 x 1 = 100 kilopounds = 100000 pounds. f the specimen is 100 ksi strength and area 2 sq inch, pounds = 100 x 2 = 200 kilopounds = 200000 pounds. In any case strength in ksi is the same for a given material and that is why ksi is used.
Ksi-One thousand pounds per square inch
Tensile Strength is 570 MPa (i.e. 82.7 ksi) - (Ref. API 5L - Specification for line pipe - Forty Forth Edition Section 9.3.2- Table 6)
The 36 stands for the yield strength in ksi Fty = 36 ksi = 36,000 psi
Tensile Strength, Ultimate 7.00 - 20.0 MPa 1020 - 2900 psi This is the strength in a pure tension test. For bending use: Modulus of Rupture 0.00410 - 0.0276 GPa 0.595 - 4.00 ksi source: http://www.matweb.com/search/DataSheet.aspx?MatID=211&ckck=1
There are 6.8948 MPa in one ksi. To convert ksi (kips per square inch) to MPa (MegaPascals), multiply the number of ksi by 6.8948.
To convert ksi to MPa, you can multiply the ksi value by 6.89476. This is because 1 ksi is equivalent to 6.89476 MPa. For example, if you have a stress value of 50 ksi, you can convert it to MPa by multiplying 50 by 6.89476 to get approximately 344.7 MPa.
7
ASTM 1011 comes in many grades which determine the yield strength ie:1011 gr 42 would have a min yield of 42,000 psi
Ksi lives near Devon.
KSI Gamertag on xbox one/series is: KSIOlatunj All Together BTW
1 ksi is equal to 1,000 psi
Tensile strength is given in ksi. To get pounds you need to know the area. Pounds = strength x area. For example if the specimen is 100 ksi strength and area 1 sq inch, pounds = 100 x 1 = 100 kilopounds = 100000 pounds. f the specimen is 100 ksi strength and area 2 sq inch, pounds = 100 x 2 = 200 kilopounds = 200000 pounds. In any case strength in ksi is the same for a given material and that is why ksi is used.
kg/cm² Yield strength is same as yield stress and are in dimensions of [force]/[area] In US, typical unit would be PSI ( lb/in^2) or KSI (kilo lb/in^2) In SI, typical unit would be Pa ( N/m^2) or MPa ( million N / m^2)
Ksi-One thousand pounds per square inch
KSI is a British YouTuber that plays a lot of FIFA games.
Tensile Strength is 570 MPa (i.e. 82.7 ksi) - (Ref. API 5L - Specification for line pipe - Forty Forth Edition Section 9.3.2- Table 6)