Hi, Swamp coolers are not a big thing in my area because of the high moisture content normally in our air.
They are most effective in very dry hot air climate situations.
The answer to your question is rather simple because the whole purpose of the system is to evaporate the cool water by the dry air which in turn has a refrigerating effect on that air.
If you do not have adequate outlets then the air will become saturated and humid and moist rendering it not only but humid as well eventually.
Things need to be balanced for best operation and most efficient operation to be achieved.
To much of anything is not good, but, then the opposite also holds true.
In the world of engineering you find everything to be a compromise.
Its always variable and a give and take.
Same goes for your system.
Imagine yourself as the engineer and using a very high tech piece of analyzing equipment to set your system to its best point for your likes.
( Your Body Senses being the test instrument) Hope this helps: Jimiwane
The desert (swamp) cooler depends upon evaporation of water for cooling. During the rainy season the air is already pretty much saturated with water vapor so little water evaporates from the cooler and they become inefficient. They are most efficient when the relative humidity is below 20%.
Swamp coolers only work well in areas with low humidities, such as the desert. They are only capable of lowering the temperature by about 20 degrees if the humidity is quite low. An air conditioner would be much cooler.
Yes, in theory, but impractical in execution. A swamp cooler normally pulls in outside air to treat, not inside air. If they are set up to recirculate inside air, they will over humidify the air, and cause sweating problems. A dehumidifier will be adding heat from the compressor into the space while it does its' job, while you then have three motors running (dehumidifier, pump, fan). For that running price, I think you could air condition your space. Those energy use calculations can be run, and you could determine it for sure. Find an engineering student to help you; it sounds like an interesting set of questions.
Resistor placed in the emitter lead of a transistor circuit to minimize the effects of temperature on the emitter-base junction resistance.
the water's latent heat of vaporization is being pulled from the air, the water pulls heat from the room to undergo a phase change.
An AC swamp cooler works by using water evaporation to cool the air. The cooler pulls in warm air, passes it through water-soaked pads, and then blows out cooler air. This process is efficient because evaporation helps lower the temperature without using a lot of energy.
replacement bearing cooler
form_title=Swamp Cooler Installation form_header=11553 Please specify the type of space the swamp cooler will be used in.*= () "Single Family Home () Mobile Home () Garage, warehouse, etc." Where would you like the swamp cooler installed?*= () Roof () Wall () Window () Attic Can you explain how the swamp cooler will be regulated?*= () On/off switch () Thermostat () Want recommendation What number of rooms would you like the cooler to be connected to?*= {Select One,1,2,3,4,5,6,7,8,9,10 or more}
A desert is cooler because of the loneliness outside
Put a lot of copper pennies in your swamp cooler. The copper will kill the mold using IONs or something.
A Breezair swamp cooler can provide cost-effective and energy-efficient cooling for your home by using water evaporation to lower the temperature. This can help reduce electricity bills compared to traditional air conditioning systems. Additionally, swamp coolers can add moisture to the air, which can be beneficial in dry climates and improve indoor air quality.
Some energy-efficient options for a home cooler include evaporative coolers, also known as swamp coolers, and energy-efficient air conditioning units with a high SEER rating. Additionally, using ceiling fans and proper insulation can help reduce the need for cooling and save energy.
Swamp cooler AC systems are cost-effective and energy-efficient, making them ideal for hot and dry climates. They add moisture to the air, providing a cooling effect and improving air quality. Additionally, they are environmentally friendly as they do not use harmful refrigerants.
A large swamp cooler can effectively cool a large space by using water evaporation, which is energy-efficient and cost-effective compared to traditional air conditioning systems. It also adds moisture to the air, making it more comfortable and beneficial for people with respiratory issues. Additionally, swamp coolers are environmentally friendly as they do not use harmful refrigerants.
Home windows do have to be open when you are using a swamp cooler. You do not open them all the way, they should be opened part way.
the best thing for a swamp cooler leak, is a copper pipe, or plumbing sealant, its similar to jb weld, only its waterproof, and made for leaks.
A swamp cooler can use anywhere from 3 to 15 gallons of water per day, depending on factors like humidity levels and desired cooling effect. It is important to regularly monitor and replenish the water in the swamp cooler to ensure its effectiveness.