0
Input
What else can I help you with?
How does robotic arm used?
they most common place is a factory.
What does a standard robotic arm consists of?
A standard robotic arm will consists of seven metal segments and six appendages, which includes a 'shoulder', 'elbow' and 'wrist'. It has six degrees of freedom corresponding to the three appendages.
A mover wants to use his own weight to lift a 450-pound box with a lever and a fulcrum He weighs 150 pounds If the output arm is 1 meter long how long does the input arm need to be?
3 meters
How do you find the mechanical advantage of a simple machine?
To find the mechanical advantage of a simple machine divide output force by input force. (input force is the force that we exert on a machine, and output force is the force that is exerted by a machine).
How do you calculate the mechanical advantage of any machine?
distance over which the force is applied ________________________________ Distance over which the load was moved or MA= Effort Force _________ Load force OR MA= Length of Load arm ____________________X Weight/mass Length of Effort arm
Is a robotic arm an output device?
Output devices are devices which shows us what the computer is processing. Without an output device the computer would do lots of processing but we can't see the results. So yes a robotic arm is an output device.
What is the input arm and the output arm on a lever?
The input arm, also known as the effort arm, is the distance from the pivot point to where the input force is applied. The output arm, also known as the load arm, is the distance from the pivot point to where the output force is exerted.
What are the input arm output arm and fulcrum of a pulley?
The input arm is the distance between the input force and the fulcrum. The output arm is the distance between the output force and the fulcrum. The fulcrum is the fixed point around which the pulley rotates.
A lever has 36cm input arm and 6cm output arm. What is the MA?
The mechanical advantage (MA) of a lever is calculated by dividing the input arm length by the output arm length. In this case, the MA would be 36cm (input arm) divided by 6cm (output arm), resulting in a MA of 6.
Can you determine the input force by knowing the input and output arm length and the output force of a lever?
Yes
Is the robotic arm on the space shuttle a robot?
Yes, the robotic arm on the space shuttle is considered a robot because it is a mechanical device that can be programmed to manipulate objects in its environment autonomously.
What is output arm?
The end of a lever that carries the load is the output arm instead of the input arm which is the end of a lever that force is applied to move the load.
A lever has an input arm 50 centimeters and an output arm 40 centimeters long what is the machanical advantage of the lever?
The mechanical advantage of a lever is calculated by dividing the length of the input arm by the length of the output arm. In this case, the mechanical advantage would be 50 cm (input arm) divided by 40 cm (output arm), which equals 1.25. Therefore, the mechanical advantage of the lever is 1.25.
What is the mechanical advantage of a lever that has an input arm of 3 meters and an output arm of 2 meters?
The mechanical advantage of a lever is calculated by dividing the length of the input arm by the length of the output arm. In this case, the mechanical advantage would be 3/2, which simplifies to 1.5. This means that for every 1 unit of effort applied to the input arm, the lever can lift 1.5 units on the output arm.
What is the mechanical advantage of a lever with an input arm of 5 m and an output arm of .5?
3
What is another name for the robots arm?
Robotic arms are often called prosthetic arms if they are on a person. If it is a robotic arm on a machine, then it is called a robotic arm.
What type of lever is the output force smaller than the input force?
A second-class lever. In this type of lever, the output force is always smaller than the input force, but the trade-off is that the output force moves a greater distance than the input force. Examples of second-class levers include wheelbarrows and nutcrackers.
