Corrugation is not just a series of connected arches. Corrugation refers to the process of shaping a material into a series of parallel ridges and grooves to increase its strength and flexibility. While arches can be a form of corrugation, there are various other shapes and patterns that can be used in the corrugation process to achieve different structural properties. The specific design and arrangement of the ridges and grooves in corrugated materials are chosen based on the desired strength, flexibility, and other characteristics for the intended application.
That depends how they are connected. For example, if they are connected in series, just add the individual resistances.
they are not always connected in series, yes most are for circuit amplification purposes, but some SCR's are just used as an electronic switch by themselves. An example is copier circuits, they use alot of them in single use applications.
--------------[res 1---]------------|-----------------|| | || [res 2] [res 3]| | || | |--------------------------------------------------------res 1 is in series with a parallel connection of res 2 and 3. This is just one example.
It's probably only a 1.2V LED. It just depends if the batteries are connected in series or parallel.
Your question is very muddled and it is difficult to understand exactly what you are asking. Something is in "series" if it is connected in the circuit as a "daisy chain". Thus both loads AND batteries may be placed in series.
That depends how they are connected. For example, if they are connected in series, just add the individual resistances.
10v In series, just add them together.
just cause
they are not always connected in series, yes most are for circuit amplification purposes, but some SCR's are just used as an electronic switch by themselves. An example is copier circuits, they use alot of them in single use applications.
In a series circuit, just add all the individual resistances, to get the total resistance.
In architecture, arches provided solid support for pathways and tunnels. Because arches distributed the weight placed on top of them much more eavenly than just a single beam, they have also been extensively used in buildings.
An electric circuit connected so that current passes through each circuit element in turn without branching.
A webcam is essentially just a camera that is connected to a computer, either directly or wirelessly, and gathers a series of images for remote display elsewhere.
--------------[res 1---]------------|-----------------|| | || [res 2] [res 3]| | || | |--------------------------------------------------------res 1 is in series with a parallel connection of res 2 and 3. This is just one example.
The big M in the McDonalds 'just stylistically evolved.
Depends on how you connect them together. Connected them in a series and you will have 18 volts. Connected them in parallel and you will still have 9 volts just double the capacity of 1 battery. Click the link to see these 2 connections.
The arch of your foot could be either on top or bottom. What most people don't understand is that people with high arches, CAN wear most shoes, just shoes with high shins are out of the picture.