0
What else can I help you with?
How do you differentiate FM from PM signal?
A: FM means frequency Modulation meaning the frequency remain the same. pulse modulation the frequency can vary
What is the bandwidth of pulse position modulation?
probably (the carrier frequency +- the maximum frequency of the pulse train)/(the carrier frequency) but pulses have a lot of harmonics
What is difference between pulse width modulation and pulse position modulation?
Frequency modulation, as the name suggests, modulates the carrier by changing the frequency of the signal emitted. Pulse width modulation, changes the on-time of a square wave, but leaves the frequency of the carrier wave unchanged. So, in frequency modulation, the frequency will vary between, say, 80kHz and 120kHz with a constant power level, but in pulse width modulation, the frequency will stay at 100kHz, but the on-time (the length of each pulse) will vary, hence the power level will vary accordingly.
What is the relationship between sampling rates and frequency of the modulating signal when using pulse modulation?
The sampling rate must be at least double the highest frequency component of the modulating signal in order to avoid frequency aliasing.
How are frequency and amplitude related?
They're not. The same amplitude can have high or low frequency, and the same frequency can have large or small amplitude.
How do you differentiate FM from PM signal?
A: FM means frequency Modulation meaning the frequency remain the same. pulse modulation the frequency can vary
What is the pulse repetition period if the pulse repetition frequency is 1 kHz?
The pulse repetition period is the inverse of the pulse repetition frequency. Therefore, if the pulse repetition frequency is 1 kHz, the pulse repetition period would be 1 millisecond (1/1000 seconds).
What is the bandwidth of pulse position modulation?
probably (the carrier frequency +- the maximum frequency of the pulse train)/(the carrier frequency) but pulses have a lot of harmonics
How drive works Calculate time in one pulse?
To calculate the time for one pulse in a drive system, you need to know the pulse frequency or pulse rate of the drive. The time per pulse is the inverse of the pulse frequency. For example, if the pulse frequency is 100 Hz, the time for one pulse would be 1/100 = 0.01 seconds, or 10 milliseconds.
Why the pulse has no frequency?
since the pulse is generated in one wave .....so.........
Why pulse has no frequency?
since the pulse is generated in one wave .....so.........
What property cannot describe a single wave pulse?
The property of frequency cannot describe a single wave pulse, as frequency refers to the number of wave cycles passing a given point per unit of time. Since a single wave pulse consists of just one wave cycle, it does not have a frequency in the same way a continuous wave would.
What is The motion of the pulse with the respect to the source?
The motion of a pulse is affected by the motion of the source. If the source is moving towards the observer, the pulse will be compressed and its frequency will increase. If the source is moving away from the observer, the pulse will be stretched out and its frequency will decrease.
What is the fundamental ripple frequency if the pulse number the ratio of the fundamental frequency and the a.c. supply frequency?
Pitch Pitch
Smaller the pulse width larger is the bandwidth How?
For the Radar Case: The bandwidth of the pulse is the reciprocal of the Pulse Duration (called Pulse Width) as any filtering needs to be able to detection and follow the pulse shape and its edges. The pulse width is the AM modulation to a Fixed Frequency Carrier Frequency and the AM modulation will be greater bandwidth then the Carrier Frequency. As you are attempting to reject receiving other emissions and noise that do not match your own emissions such that your receiver is "match filtered" to your emissions, your receiver bandwidth will be at least the reciprocal of the pulse width but is lightly to be a smaller bandwidth then the reciprocal of the pulse width.
Is prf a protein reactive factor?
Pulse Repetition Frequency.
What is a pulse rate of a clock measured in?
frequency of an oscillator crystal
