answersLogoWhite

0

No, that is not common, but there are many different shower pans, so mistakes are possible.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

Shower curtain or liner and curtain?

I can consider it to be both.


What does a liner hanger do in drilling process?

Liner is basically a kind of casing the main difference b/w liner and ordinary casing is that , the ordinary casing extends from surface to particular depth but in case of liner it does not extend from surface to particular depth but it attaches with the last part of the above casing .For example if you have drilled TD of 15000 ft and you have to install a liner at the bottom and suppose the liner length is 200ft.All the other casings will be installed from surface to to its particular desire depth but liner will be installed at the bottom of the other casings . Advantages 1.Economics: you save the cost of 14800 ft of steel or aluminum . 2.Reducing the pressure at the surface: If you install a liner having a length of 15000 ft it will produce a lot of pressure on the surface .


What is the item used under the shower pan that creates the slope for the drain when installing a new shower?

The item used under the shower pan to create the slope for the drain is called a "shower pan liner" or "shower pan membrane". It is typically made of PVC or CPE (chlorinated polyethylene) and is installed over the subfloor and around the drain to create a waterproof barrier. The liner is then sloped towards the drain using a combination of techniques, such as sand or mortar beds, pre-sloped foam panels, or adjustable slope systems. The choice of method depends on the specific requirements of the installation and the installer's preference. Once the liner is in place and sloped properly, the shower pan can be installed on top of it, and the tile or other finish material can be applied. Proper installation of the shower pan liner is crucial for ensuring that water drains properly and does not seep into the subfloor or surrounding areas, causing damage or mold growth. HydroBlok systems are known for their durability, water resistance, and ease of installation. They can be used for both residential and commercial applications and are suitable for a variety of finishes, including tile, stone, and vinyl.


What is the anti polishing ring?

Anti-polishing rings are used to prevent carbon build-up in the cylinder liner. The carbon polishes the cylinder liner leaving it with a smooth surface. A smooth cylinder liner is bad because the lube oil won't be able to stick to the liner.


What does a flue liner do and how much does it cost?

A flue liner protects the bricks or masonry that makes your chimney for your fireplace. It can also protect any wood that it is close to. Flex King offers a flue liner for around $400.00.

Related Questions

How to install a shower liner?

To install a shower liner, first measure the shower area and cut the liner to fit. Attach the liner to the shower walls using adhesive or nails. Make sure the liner is securely in place to prevent leaks. Finally, seal the edges and corners with caulk for added protection.


How much is it to install a shower liner and wall system?

$6,800


How to install a shower pan liner and mortar correctly?

To install a shower pan liner and mortar correctly, first, ensure the subfloor is clean and level. Next, place the shower pan liner over the subfloor and up the walls, ensuring it overlaps the drain. Secure the liner with nails or adhesive. Then, mix and apply a layer of mortar over the liner, sloping it towards the drain for proper drainage. Allow the mortar to set before tiling the shower floor.


How high do you install shower drain for shower pan liner installation?

see this link for one answer http://www.oatey.com/shower_drains/lit/Shower%20Pan%20Liner.pdf


What is the difference between a shower curtain and a shower liner?

a shower curtain goes on the outside and a shower liner goes on the inside so the shower curtain wont get wet


How to install a mortar bed for a shower pan?

To install a mortar bed for a shower pan, first ensure the subfloor is clean and level. Mix mortar according to manufacturer instructions and spread it evenly on the subfloor. Place a shower pan liner over the mortar and press it into place. Add more mortar on top of the liner and slope it towards the drain. Allow the mortar to set before installing the shower pan on top.


Which way is the best to install a rubber liner in a shower new construction?

The best way is to install 6 mil or greater poly sheeting. this will ensure a longer lasting seal.


What is the difference between a shower curtain and a shower curtain liner?

A shower curtain is for decor and hung on the outside of the bathtub/shower. Whereas a shower curtain liner is hung on the inside of the tub/shower to protect the shower curtain. In simpler terms...SHOWER CURTAIN: gets to hang and look pretty and be dry. SHOWER CURTAIN LINER: protects shower curtain from getting wet because it's the one getting wet!


Can you use just a shower liner without a shower curtain?

Yes


What are the benefits of using a shower liner?

A shower liner helps to protect your shower curtain from getting wet and moldy, making it last longer. It also helps to prevent water from leaking out of the shower and causing damage to your bathroom floor.


Does both a shower liner and curtain go inside the tub while showering?

Curtain in, liner out.


Shower curtain or liner and curtain?

I can consider it to be both.