0
Yes, to calculate the amount of gravel needed for a slab, you can use the formula: Volume = Length × Width × Depth. First, measure the dimensions of the area where the slab will be placed, then convert these measurements into the same unit (e.g., feet or meters). Multiply these dimensions to get the volume in cubic feet or cubic meters. Finally, since gravel is typically sold by the cubic yard, convert the volume from cubic feet or meters to cubic yards by dividing by 27 (for cubic feet) or 1.31 (for cubic meters).
What else can I help you with?
How much gravel is needed for a driveway 1780 sq ft 12 inches deep?
You will need 65.93 cubic yards or 84.6 tons of gravel.
How much does gravel cost per cubic yard?
i saw $20-25 for coin size type gravel
How much do you charge to put gravel in to crawlspace?
for free
How much pea gravel do you need for 24 lineal feet?
Can't answer unless we know the depth of the gravel and width of the area.
How much gravel needed to cover driveway 150ft by 10ft and one inch thick?
You would need about 5 cubic yards. Gravel is usually sold by the ton. I do not know that conversion. Who ever would deliver it for you should be able to help. If I were using crushed concrete I would use 15 tons... but I can not spread it 1" thick either.
What is the formula for calculating how much gravel will be needed for walking paths?
To calculate the amount of gravel needed for walking paths, you can use the formula: Volume = Length × Width × Depth. First, measure the length and width of the path in feet, then determine the desired depth of gravel in feet. Multiply these three dimensions together to get the volume in cubic feet, and if needed, convert this volume to cubic yards by dividing by 27 (since there are 27 cubic feet in a cubic yard).
How much gravel is needed for a driveway 1780 sq ft 12 inches deep?
You will need 65.93 cubic yards or 84.6 tons of gravel.
How much gravel needed to make a gravel road 180 yards long x 3 feet wide x4 inches deep?
You will need 20 cubic yards or 25.7 tons of gravel.
How much gravel for a 0.75 foot wide and 250 feet long driveway using a depth of 14 inches?
To calculate the volume of gravel needed, first convert all measurements to the same unit. Then, use the formula: Volume = width (ft) x length (ft) x depth (ft). In this case, you would calculate: 0.75 ft x 250 ft x (14/12) ft = 218.75 cubic feet of gravel needed for the driveway.
How much gravel is needed to cover 350 square feet 2 inches deep?
Plan on about 2.2 cubic yards (2.8 tons) of gravel.
How much gravel is needed to make a 60cm x 60cm x 4.5cm concrete slab?
231
How much gravel do you need to cover an 18 foot circle 4 inches deep?
To calculate the amount of gravel needed, first find the area of the circle using the formula A = πr². The radius of an 18-foot circle is 9 feet, so the area is approximately 254.47 square feet. To find the volume needed for a depth of 4 inches (which is 1/3 of a foot), multiply the area by the depth: 254.47 sq ft × 1/3 ft = about 84.82 cubic feet of gravel.
How much gravel is needed to cover 30000 square feet?
92.593 cubic yards for every inch deep.
How much gravel is needed to cover 3000 square feet?
9.26 cubic yards for every inch of depth.
What is the equation to figure out how much concrete is needed?
its about 12x5x67 respectively
How much gravel would it take to fill a ditch 5500' long 36'' deep 16 '' wide?
To calculate the volume of gravel needed, first convert the dimensions to feet: 36 inches is 3 feet deep, and 16 inches is approximately 1.33 feet wide. The volume can be calculated using the formula for volume: length × width × depth. Therefore, the volume is 5,500 feet × 1.33 feet × 3 feet, which equals approximately 21,915 cubic feet of gravel needed to fill the ditch.
How do you measure how much drywall needed?
You figure out the square footage, and then the size and number of boards needed.
