8 kilos sand to the 2 kilos cement.
How much cement sand and stone do you need for 1 cubic meter of concre
I am building a curb that will be 26 feet long, 6.5 inches wide and 4 inches deep. How much cement do I need?
1 cubic yd of a concrete mixture contains about 500 hundred lbs of cement
Depends on size of the patio.
How much? what kind of plywood floor? Why do you need to do this??
You already have the amount of cement you need 75lbs so that is your 3 parts cement. 25 + 25 + 25 =75. Now add the 2 parts sand 25 + 25 = 50lbs. --------------------------------------------------------------------------------------------- Find fractional parts. There is a total of 5 parts. 2/5 = .4 is the fractional part of sand and 3/5= .6 is the fractional part of cement. Then .4 x 75 = 30lb is the sand and .6 x 75 = 45lb is the cement. This gives 75lbs of concrete. If you are asking how much sand to add to 75lbs cement the top answer is correct.
How much cement sand and stone do you need for 1 cubic meter of concre
Depending on the type of grain, you would need in between 3 and 4 kilos of uncooked rice.
700 sq ft * 1/12 ft = 700/12 cubic feet = 58.33... cubic ft or 2.16 cu yards.
1 cement 2 sand 3 gravel
How much cement is needed to cover 192 square feet of area
To lay 65 square meters of concrete, the amount of sand and cement required depends on the thickness of the concrete layer. For a typical thickness of 10 cm, you would need approximately 0.65 cubic meters of concrete. A common mix ratio is 1 part cement to 2 parts sand to 3 parts gravel. In this case, you would need about 130 kg of cement and around 0.26 cubic meters of sand. Adjustments may be necessary based on the specific mix design and project requirements.
You need sand in it. 1 part cement to 2 parts sand.
5417011414
I am building a curb that will be 26 feet long, 6.5 inches wide and 4 inches deep. How much cement do I need?
1 cubic yd of a concrete mixture contains about 500 hundred lbs of cement
Depends on size of the patio.