chutiya bahanchod
Capacitor is basically voltage holding device. So it can be used for wave shaping Circuits. Integrator is nothing but voltage integrator with respect to time. As per capacitance different voltages at sequential instants are integrated with respect to time.
Circuits whose output is in the form of a wave. For instance, there are sine waves, square waves, triangle waves, and others.
Basically an analog circuit is any circuit which uses the voltage (or current) level to deliver information (say.. a sine wave or an audio output). In contrast a digital circuit would only use a high and a low voltages (square wave, binary data transfer etc). Discrete circuits are circuits only using basic components (resistors, transistors, capacitors etc) instead of integrated circuit packages. A lot of discrete circuits are analog but they don't have to be. And a lot of ICs are digital but they don't have to be...
By switching circuits or transistors that turn on and off the polarity. This usually results in a square wave output. Then capacitors charge and discharge to smooth out the square wave to resemble the AC sine wave. The better or more expensive the inverter, the closer to an actual sine wave it gets.
Timers, oscillators, square wave generator, power supply clocks, system clocks...you name it.
the process of producing non sinusoidal output waves from sinusoidal input is cald non linear wave shaping.. the circuits of this sort are called non linear wave shaping circuits.. they are of two types.. clippers and clampers
Linear wave shaping is the process of modifying the shape of a waveform while maintaining linearity in the output. Examples include amplifiers, differentiator circuits, and integrator circuits. These circuits can shape the waveform by altering its amplitude, frequency, or phase without distorting the linearity of the output signal.
Wave shaping is needed to modify the shape of a waveform to achieve desired characteristics such as distortion, timbre, or harmonic content. It is commonly used in audio signal processing to create unique and interesting sounds in music production and synthesis.
Capacitor is basically voltage holding device. So it can be used for wave shaping Circuits. Integrator is nothing but voltage integrator with respect to time. As per capacitance different voltages at sequential instants are integrated with respect to time.
Circuits whose output is in the form of a wave. For instance, there are sine waves, square waves, triangle waves, and others.
if a sinusoidal voltage is applied to linear circuit the output voltage is also sinusoidal in nature as far as the waveform is concerned the amplitude of input signal may change and there may be phase displacement between input voltages and output voltages
i dont know why is it
used as wave form generators like sinusoidal and non sinusoidal,
J. Helszajn has written: 'Passive and active microwave circuits' -- subject(s): Microwave circuits, Microwave devices 'Stripline Circulators' -- subject(s): Circulators, Wave-guide, Design and construction 'The stripline circulator' -- subject(s): Circulators, Wave-guide, Design and construction 'Green's function, finite elements, and microwave planar circuits' -- subject(s): Mathematical models, Microwave integrated circuits, Finite element method, Green's functions 'Principles of microwave ferrite engineering' -- subject(s): Microwaves, Ferrite devices 'Microwave engineering' -- subject(s): Ferrite devices, Microwave antennas, Microwave circuits 'Waveguide junction circulators' -- subject(s): Circulators, Wave-guide, Junctions, Wave-guide
Clamping circuits use diodes and capacitors. First, the first circuit must be set up, then a?æsine wave should be input into it. The input and output should be observed and adjusted as necessary; then, the process should be repeated for the other circuits.
Basically an analog circuit is any circuit which uses the voltage (or current) level to deliver information (say.. a sine wave or an audio output). In contrast a digital circuit would only use a high and a low voltages (square wave, binary data transfer etc). Discrete circuits are circuits only using basic components (resistors, transistors, capacitors etc) instead of integrated circuit packages. A lot of discrete circuits are analog but they don't have to be. And a lot of ICs are digital but they don't have to be...
The two main types are series and parallel circuits. From these two circuits comes combinations of different series parallel circuits depending on what end results you need.