Need for modulation:
1. Length of the antenna for a transmitter is inversly proportional to the frequency of the signal to be transmitted. So we try shift the frequency of the singal for the transmission to higher frequencies.
2. Every transmission of signal in a bandwidth is assigned with a particular frequency which is attained by modulating the signal with the carrier frequency.
Different modulation techniques are implemented according to the requirements and compatibilities
Need for modulation 1) to reduce the antenna height 2) to multiplex the more number of signals 3) to reduce the noise & distortions 4) to narrow banding the signal 5) to reduce equipment
Morse code and the Telegraph had that technology.
Quadrature Amplitude Modulation (QAM) is often considered superior to other modulation schemes due to its ability to transmit multiple bits of data per symbol by combining amplitude and phase variations. This efficiency allows for higher data rates within the same bandwidth compared to traditional methods like Amplitude Modulation (AM) or Frequency Modulation (FM). Additionally, QAM can effectively combat noise and interference, making it suitable for high-capacity communication systems, such as digital television and broadband internet. Overall, its versatility and efficiency make QAM a preferred choice in modern digital communication.
—Analog digital hybrid modulation seeks the ways to eliminate the incoherent quantization noise component in digital communication, instead of conveniently making it minimal.
the modulation system is of FM
qpsk modulation
Frequency shift keying in digital communication and Frequency modulation in analog communication..........
modulation
frequency modulation, preferably.
Adaptive delta modulation is used in audio communication systems to avoid the two drawback of delta modulation.
Data modulation is a method of Electronic packing of data. In Data communication data is transmitted through a process which is called "Data Modulation".
Adaptive delta modulation is used in audio communication systems to avoid the two drawback of delta modulation.
Modulation is the addition of information to an electronic or optical signal carrier. The modulation can be applied by turning the signal on and off.
AM and FM AM=Amplitude Modulation FM=Frequency Modulation Hope this helps
i refered modulation is the sequence of message in to analog symbol( Simon haykin ,communication systems),,but i am not clear with this,couul u pls clarify?
A: Dbm or decibel of modulation
Analog