answersLogoWhite

0

There are three main temperature scales in use: degrees Celsius, degrees Fahrenheit, and Kelvin. Of these three, the boiling point of water at STP is 100 degrees Celsius.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Engineering

What is the temperature before you call it steam?

Steam has a minimum temperature of 212 degrees Fahrenheit or 100 degrees Celsius, because those are the temperature at which water boils under normal pressure. Once steam goes below those temperatures it turns back into water. Steam can be heated above those temperatures under certain conditions and is then called superheated steam.


Why do some desalination plants boil water under reduced pressure?

on a normal pressure (1 atm) water boils on a temperature of 100 C, but when we reduce the pressure, ebullition temperature will be also reduced (it will become less then 100) which means that they can boil more water using less energy


What is the maximum hot water temperature recommended by water heater manufacturers and most State safety agencies?

120 degrees


What is the temperature of steam at pressure 2.4 bar?

At a pressure of 2.4 bar, the temperature of saturated steam is approximately 134.5 degrees Celsius (or 274.1 degrees Fahrenheit). This temperature corresponds to the boiling point of water at that specific pressure. As pressure increases, the boiling point of water rises, resulting in higher steam temperatures.


At what temperature does mixture of water and xylene boil?

The boiling point of a mixture of water and xylene will depend on the composition of the mixture. Xylene has a boiling point range of 137-140 degrees Celsius, while water boils at 100 degrees Celsius. The boiling point of the mixture will be between these two temperatures, depending on the ratio of water to xylene present.

Related Questions

What is the temperature scale on which water boils at 100 degrees?

Water boils at 100 degrees Celsius on the Celsius temperature scale.


Which temperature scale was used if water boils at 100 degrees?

The temperature scale used where water boils at 100 degrees is the Celsius scale.


On the celsius temperature scale water freezes at and boils at degrees?

Water freezes at 0 degrees Celsius and boils at 100 degrees Celsius on the Celsius temperature scale.


Which scale boils the water to 100 degrees?

If you mean the temperature of boiling water then Celsius or Centigrade scale


In the Fahrenheit temperature scale water freezes at 0 and boils at 100?

No, water freezes at 32 degrees and boils at 212.


What is the Fahrenheit scale and how is it different from the Celsius scale?

The Fahrenheit scale is a temperature scale used to measure temperature. It is different from the Celsius scale in that it has a different zero point and uses different intervals for measuring temperature. On the Fahrenheit scale, water freezes at 32 degrees and boils at 212 degrees, while on the Celsius scale, water freezes at 0 degrees and boils at 100 degrees.


On celsius scale water boils at what temperature?

100 degrees (at sea level).


At what temperature does water boil when using the celsius scale?

Water boils at 100 degrees Celsius on the Celsius scale.


What scale boils water at 373 degree's?

Firstly, temperatures measured in Kelvin (K) are not degrees but rather, just numbers. However, 373 K is the same as 100 degrees C. At that temperature, pure water begins to boil at sea level.


Which temperature scale uses 212 degrees for the boiling point of water?

Pure water boils at 212ºF when standard atmospheric conditions exist. Standard conditions are sea level with the baometer reading 29.92 in. Hg (14.696 psia).


What is the order of Fahrenheit?

Fahrenheit is a temperature scale in which water freezes at 32 degrees and boils at 212 degrees


Water boils at how many degrees on the celsius temperature scale?

100° at sea level