1 kg/cm2 = 10000 kgforce/m2
1 kgforce = 1 kg * 9.80665 m/s2 = 9.80665 Newtons
So 1 kg/cm2 = 98066.5 N/m2
1 Pascal is defined as 1 N/m2
So 1 kg per cm2 = 98066.5Pa
"When the gauge factor of a strain gauge is 2 stress is 1050 kgcm2 Y 2.1 106 kgcm2 and R is 100 ohms then the value of DR will be?"
Pascals
If you are thinking TPa, that is terapascals, or 1 trillion pascals. It is used where truly massive pressures exist. For tensile strength, no material has a strength measured that high. Most materials are measured in MPa, or 1 million pascals.
what is answer timber conversion
it depends on what your dealing with, room pressure is found with a barometer, to measure pressure in a flowing fluid, you can use a manometer. there are many variou ways to find pressure, but you must be specific on the circumstances
The conversion factor from millimeters of mercury (mmHg) to pascals (Pa) is 133.322.
1 atm(atmospheric pressure)=101,325pa(pascals)
To convert inches of Mercury to pascals, use the conversion factor 1 inHg = 3386.39 Pa. Multiply the value in inches of Mercury by this conversion factor to get the equivalent value in pascals.
The conversion factor from pascals to pounds per square inch (psi) is 1 pascal 0.00014503773773 psi.
"When the gauge factor of a strain gauge is 2 stress is 1050 kgcm2 Y 2.1 106 kgcm2 and R is 100 ohms then the value of DR will be?"
The conversion factor from joules per cubic meter (J/m3) to pascals (Pa) is 1 J/m3 1 Pa.
To convert millimeters of mercury (mm Hg) to pascals, you can use the conversion factor of 1 mm Hg 133.322 pascals. Simply multiply the number of millimeters of mercury by 133.322 to get the equivalent pressure in pascals.
To convert tons to Mega pascals, you need to specify the material's density or stress. The conversion factor will depend on this information. Without that, a direct conversion from tons to Mega pascals is not possible.
To convert pressure from pascals (Pa) to pounds per square inch (psi), you can use the conversion factor 1 Pa 0.00014503773773 psi. Multiply the pressure in pascals by this conversion factor to get the pressure in pounds per square inch.
To convert pressure units from pascals (Pa) to pounds per square inch (psi), you can use the conversion factor of 1 psi 6894.76 Pa. Simply divide the pressure in pascals by 6894.76 to get the equivalent pressure in pounds per square inch.
1 psi = pounds per square inch equals 6894.757 pascals. that is arroud 6.89 kilopascals.Scroll down to related links and look at "Conversion of pressure or stress units".
5 pascals (Pa) = 0.000005 megapascals (MPa)