r2j10160
I assumed thats what its designed to be. See the datasheet on usage.
two You can verify this on the datasheet.
pin tetel
musical 3 pin IC UM66 and a popularly known Transistor BC548b
these two pins are biasing pins of ICs.
read the datasheet or databook entry for the chip. there is no other reliable way.
To identify pin connections on an AND gate IC chip, refer to the datasheet provided by the manufacturer. The datasheet will have a pinout diagram showing the location and function of each pin on the chip. Additionally, you can use a multimeter to test for continuity between pins to confirm their connections.
Check the datasheet for pinout.
This depends on the IC. Visual inspection will only go so far. You will need to test it and compare the testing to the datasheet; if it is not testing as specified in the datasheet, then it is bad. Sorry, there's no one easy answer for all IC's.
You can just Google the IC number and check the datasheet. This is very useful for getting the pin configuration of other IC as well. Anyway 7486 is a 14pins, 4 independence gates of XOR Gate Input Output #1 Pin1 Pin2 PIN3 #2 Pin4 Pin5 PIN6 #3 Pin10Pin9 Pin8 #4 Pin13Pin12 Pin11 Others Vcc Pin 14 Gnd Pin 7 Hope that helps.
Type LM567 datasheet into Google, fool!
I assumed thats what its designed to be. See the datasheet on usage.
The 8085 is a 40 pin ic because Intel designed it that way.
Here you go.... http://www.alldatasheet.com/datasheet-pdf/pdf/202145/TI/UN2003A.html
two You can verify this on the datasheet.
What enable1&enable2 in pin l293d
Is it APR 9600 or ARP 9600? If it is APR 9600 sound record/replay IC, check out the link given below. It contains the pin configuration of the IC.