0
What else can I help you with?
What is Impedance 10 Ohms?
Impedance of 10 Ohms refers to the measure of opposition that a circuit presents to the flow of alternating current (AC). It encompasses both resistance and reactance, which can be influenced by capacitors and inductors in the circuit. A lower impedance, like 10 Ohms, typically allows more current to flow, making it significant in applications such as audio systems and RF circuits where matching impedance is crucial for optimal performance.
Why does the inductor have impedance at high frequencies?
An inductor has impedance at high frequencies because its reactance, which is a measure of how much it resists changes in current, increases with frequency. This reactance is given by the formula (X_L = 2\pi f L), where (f) is the frequency and (L) is the inductance. As the frequency increases, the inductor opposes rapid changes in current more effectively, resulting in higher impedance. This behavior makes inductors useful in filtering applications, where they can block high-frequency signals while allowing lower frequencies to pass.
What is relationships of capacitive reactance to resistance?
when ever current passing through any two parallel transmission line than due to the dieletric property of conductor some what capacitance effect will be generate between them that phenomina called as capitance reactance/////////////////// that symply we can called capitance reactance is measure of capitance The reactance of a capacitor is its resistance.
Will the two-wattmeter method work for all three-phase loads eg unbalanced loads inductive loads capacitive loads and delta-connected loads?
Blondel's Theorem tells us that, to measure the total power of a three-phase load (balanced or unbalanced), we can use one less wattmeter than there are conductors supplying that load.So the two-wattmeter method will work for anythree-phase load, provided there are only threeconductors supplying that load, e.g. three-wire delta or three-wire star (wye).Bear in mind that wattmeter's read true power (expressed in watts) and ignores the reactive power of inductors and capacitors.
How do you measure the capacitance of 3 phase capacitor in active line voltage of 3 phase circuit?
You measure the capacitance of a capacitor in an active circuit by observing the voltage across it and the current through it. That gives you, by Ohm's law, the impedance of the capacitor. Plug that in the the equation for capacitive reactance, and you get capacitance. Note: There is no such thing as a three phase capacitor. A capacitor is a two terminal device that resists a change in voltage inversely proportional to its capacitance. You connect one capacitor to one phase. If you have a "three phase capacitor", then you are talking about three capacitors. Deal with each one separately.
Will the value of joules constant be same if AC were used instead of DC?
Joules measure energy (power x time). If the AC voltage is expressed as rms (root mean square) and not peak, and there are no capacitors or inductors in the circuit, then the joules per second (=power ) will be the same.
What is Impedance 10 Ohms?
Impedance of 10 Ohms refers to the measure of opposition that a circuit presents to the flow of alternating current (AC). It encompasses both resistance and reactance, which can be influenced by capacitors and inductors in the circuit. A lower impedance, like 10 Ohms, typically allows more current to flow, making it significant in applications such as audio systems and RF circuits where matching impedance is crucial for optimal performance.
The unit of measure of inductive reactance?
The unit of measurement for inductive reactance (XL) is the ohm.
What do you measure with ohm?
Impedance, resistance, and reactance.
What is an nF?
If its capacitors you are talking about, it stands for nanoFarad and it is a unit of measure.
What is the unit of measure of capacitor?
Capacitors are measured in Farads or microfarads.
Why does the inductor have impedance at high frequencies?
An inductor has impedance at high frequencies because its reactance, which is a measure of how much it resists changes in current, increases with frequency. This reactance is given by the formula (X_L = 2\pi f L), where (f) is the frequency and (L) is the inductance. As the frequency increases, the inductor opposes rapid changes in current more effectively, resulting in higher impedance. This behavior makes inductors useful in filtering applications, where they can block high-frequency signals while allowing lower frequencies to pass.
What is relationships of capacitive reactance to resistance?
when ever current passing through any two parallel transmission line than due to the dieletric property of conductor some what capacitance effect will be generate between them that phenomina called as capitance reactance/////////////////// that symply we can called capitance reactance is measure of capitance The reactance of a capacitor is its resistance.
Why does an inductor block AC but allow DC?
While it is true that an inductor opposes the flow of an alternating current, it does not necessarily 'block it'. The quantity that opposes the flow of an AC current is the inductor's inductive reactance, expressed in ohms. Inductive reactance is proportional to the frequency of the supply voltage and, at 50 or 60 Hz, the reactance of a transformer's winding is relatively low (although very much higher than its resistance) and, while this acts to limit the amount of current flow, it certainly doesn't act to block that flow.
What is the mean of in electrical uH?
The electrical abbreviation ( UH ) is a measure of inductance , as in a ferrite transformer core , inductors , choke etc. .
What is the measure of the steepness of line expressed as rise over run?
The measure of the steepness of line expressed as rise over run is called slope.
What is the unit of measure in which latitude and longitude is expressed?
Latitude and longitude are angles, and can be expressed in any unit of angle measure. Degrees are quite popular.
