0
What else can I help you with?
Why won't heat rise from basement to the upstairs in the home that heats with wood stove?
If the wood stove is in the basement it will heat up the rest of the house but if it is not in the basement you have to find some way to vent it down there.
Which is more efficient a wood stove or a high efficiency furnace?
depends on whether you have to pay for the wood... if the wood is free then you can't beat the costs.
When burning your wood stove some times you open to put more wood in and there is a layer of charcoal not fully burned. Is this from not enough incoming air.Pipe damper is closed too much?
Wood Stoves are not designed to burn wood all the efficiently and the coals you see are normal. There really isn't a lot you can do to improve the burning efficiency of your wood stove. If the stove is heating properly and you have a small amount of unburned charcoal, you are doing everything fine.
Is it safe to use galvanized stove pipe with a wood stove?
Using galvanized stove pipe with a wood stove is not recommended because the zinc coating can release toxic fumes when heated to high temperatures. Galvanized pipes are designed for venting gases that are not as hot or corrosive as those produced by wood stoves. Instead, it's safer to use stovepipe specifically designed for wood-burning appliances, which can withstand higher temperatures and resist corrosion. Always prioritize safety and follow local building codes and manufacturer recommendations.
Is it safe to burn cedar in a wood stove?
I have a wood stove and have burned cedar in it for years, it is completely safe. Recently alot of cedar trees have died on my property so I have had an abundance of the wood. It burns alot faster than oak so i mix the two for a longer lasting fire. Enjoy
How do you remove melted plastic from a wood floor?
To remove melted plastic from a wood floor, you will need an iron and brown paper sacks or brown craft paper. Lay the craft paper over the plastic. Apply the hot iron to the paper and apply pressure just until the plastic becomes soft. Once the plastic is soft, peel it off the wood floor.
How do you remove melted plastic from a wood stove?
If plastic is melted I guess it would be useless and the ways u can get rid of it is by either scratching it off or use solvents such as Hexane's ( to buy this solvent I think you need a licence and it is extremely flammable).Plastic dissolves in this type of solvents and then you can just rinse it off. The safest and most effective way is to heat up your wood stove (as I assume the melted plastic is on the outside) and use a putty knife to scrape it off when it's hot.
What is a wood pellet stove?
A wood pellet stove is a stove that burns pellets or wood. Burning the wood or pellets creates a source of heat for homes or businesses.
What does a wood stove blower do?
A traditional wood stove burns wood to heat a room. The wood stove blower is a fan system that is used to distribute the heat created by the stove around a room or building.
What is the process for wood stove removal and disposal?
The process for wood stove removal and disposal typically involves disconnecting the stove, removing it from the location, and properly disposing of it at a designated facility. It is important to follow local regulations and guidelines for safe and environmentally friendly disposal. Hiring a professional service may be recommended for this task.
How do you convert a coal burning stove to a wood burning stove when The stove is a Haman Mark 3 which is a very big stove?
Put wood inside instead of coal one day and see what happens. Size does not matter. If it is a large stove use large wood, if it is a small stove then use small wood.
Is a wood pellet stove better than a conventional stove?
A conventional stove is better, as it uses less wood burning materials.
Will wood catch on fire placed on top of a wood stove?
It certainly can if the top of the stove reaches the ignition temp of the wood.
What does a wood stove use for fuel?
wood
What is a wood pellet?
A wood pellet stove is a stove that burns pellets or wood. Burning the wood or pellets creates a source of heat for homes or businesses.
How can I make a plastic mold for my project?
To make a plastic mold for your project, you can start by designing the mold using computer-aided design (CAD) software. Then, you can create a prototype using materials like clay or wood. Once the prototype is ready, you can make a mold using silicone or other mold-making materials. Finally, pour melted plastic into the mold and allow it to cool and solidify before removing the plastic piece from the mold.
Can you use your wood burning stove if your only source heat is from Propane?
No, a wood burning stove requires wood as its fuel source, not propane. It is not safe to burn wood in a stove designed for propane only. It is important to adhere to the manufacturer's instructions and use the appropriate fuel for your stove.
