0
What else can I help you with?
Explain the major difference between combinatorial logic and sequential logic?
It was mentioned that there are two different ways to connect two or more electrical devices together in a circuit. They can be connected by means of series connections or by means of parallel connections. When all the devices in a circuit are connected by series connections, then the circuit is referred to as a series circuit. When all the devices in a circuit are connected by parallel connections, then the circuit is referred to as a parallel circuit. A third type of circuit involves the dual use of series and parallel connections in a circuit; such circuits are referred to as compound circuits or combination circuits. The circuit depicted at the right is an example of the use of both series and parallel connections within the same circuit. In this case, light bulbs A and B are connected by parallel connections and light bulbs C and D are connected by series connections. This is an example of a combination circuitBy EngineerMuhammad Zaheer Meer GMS
What is the difference between characteristic table and excitation table in a flipflop?
A characterisitic table has the control input (i.e., D or T) as the first column, the current state as the middle column, and the next state as the last column. Basically, it tells you how the control bit affects the current state to produce the next state. An excitation table has the current state as the first column, the next state as the second column, and the control bit as the third column. Basically, think of this as the state you have (first column), the state you want (second column), and what you must set the control bit (third column) to get the desired state you want. The excitation table is used to implement an FSM.
Who is George Mealy?
George H. Mealy presented the concept of a finite-state machine that became known as the Mealy machine in a 1955 paper, "A Method for Synthesizing Sequential Circuits." This machine differs from a Moore machine in that rather than the outputs being defined by the current state, the outputs are defined by both the current state and the current inputs.
Difference between mealy and Moore sequencial circuits?
in the Moore finite state machine model output depends only on the present state. but in the mealy model the output depends on the both present state and the input. this is the main difference
What is the use of excitation table in digital electronics?
Excitation tables helps to know the input conditions of the flip flops that will cause the required transition from the present state to the next state.
What is the difference between a combinational and a sequential circuit?
In a combinational logic circuit, the output(s) depend only on the present values on the input, not on any previous values. In a sequential circuit, the output(s) also depend on the previous values. A sequential circuit must contain a memory element (at least one flip-flop) to hold the state of the circuit.
What is the minimum wage for a dishwasher in WA state?
$9.19
Explain the use of state diagrams in a sequential circuit?
State diagrams are used to model the behavior of sequential circuits by showing the different states the circuit can be in and the transitions between those states based on inputs. Each state represents a unique condition or behavior of the circuit, and the transitions show how the circuit moves from one state to another in response to input changes. By visually depicting the states and transitions, state diagrams help in designing and analyzing sequential circuits for correct operation.
Define sequential operating system?
Sequential systems extend the idea of combinational logic by including a system state, or in other words memory, to our system. • This allows our system to perform operations that build on past operations in a sequential manner (i.e. one after another).• Timing diagrams will be needed to analyze the operation of many sequential systems.
Does the Bible state you can have a number of sequential marriages?
The Bible states you can if you want more than one wife.
What is the present tense of stated?
State is present tense.
Planning is looking ahed and control is looking back comment?
I disagree. Planning is indeed looking ahead, but control is looking at the present (not the past) and having some influence on how the present will behave in the future. Control is having a feedback loop, where the current status of the system will cause actions that will influence the future state of the system.
Why using flipflop for physical design in vlsi?
Flip-flops are commonly used in VLSI physical design for sequential logic circuits due to their ability to store binary information and synchronize signals. They help in controlling the timing of signals and reduce the chances of metastability issues. Flip-flops also provide a way to control the state of a circuit at specific clock edges, aiding in sequential circuit design.
Can it be argued that the past is a record of the state of the present?
It depends with the routine of the state or responsibility but normally it changes.some time passed won't reflect present condition
What is the state of southafrica?
At present South Africa is in a state of calm, It is a beautiful country with many diverse cultures and peoples, This country has a huge potential for growth in the agricultural and manufacturing sectors which at present is being held down by the lack of control of imports from other countries. ( personal opinion)
When was State of Control created?
State of Control was created in 1989.
Do you need a dishwasher vent in Washington?
It is called an air-gap not a vent. If you are asking about Washington State the answer is yes it is required.
