Gain in decibels is a logarithmic base 2 scale with a multiplier of 3, so 3 db is twice the power, 6 db is four times, etc. Gain of -3.5 db means a power loss of 21.17, or a ratio of about -2.25. Note, however, that this is power, not voltage. Since power is voltage times amperes, and since amperes is voltage divided by resistance, in order to achieve a power loss of 2.25, the voltage must change by the square root of that, so the voltage changed by -1.5.
Concrete hardens as a result of the chemical reaction between cement and water so that for every 4 lbs of cement 1 lb of water is needed. The ratio is therefore 1:4 or 20%. This mix will be too dry so more water is needed than is technically necessary, the ratio should therefore be 35% to 40% and using a plasticizer
A very high gain margin or phase margin produces stable feedback systems, however they may be sluggish in operation. If the gain margin is close to unity of the phase margin is close to zero, the system will be highly oscillatory and produce overshoots with large amplitudes that take a while to settle. Having a gain of 6 dB or phase margin of 30 - 35 degrees will give you a relatively stable system. However there exists cases where this may not be so. :-)
Yes, sulfur-35 (S-35) is a beta emitter. It undergoes beta decay, where it emits beta particles (electrons) as it transforms into phosphorus-35 (P-35). This makes S-35 useful in various applications, including tracer studies in biological research.
35 years
Replacement of cement with flyash in concrete is 20-35 % by weight for normal structures. however for special structures like dams the replacement levelscan be increased to up to 70 %. (where flyash must be ISI standards compatible or any such standards) This replacement also reduces water requirement by 2.5 % for every 10 % replacement of flyash used.
56 divided in the ratio 35 = 1.6
No - the ratio 35 to 10 is equivalent to the ratio 7 to 2 (not 7 to 5) because 7x5=35 and 2x5=10.
It means , the ratio has to be calculated. The ratio is = 52 :35.
35:45 ratio can be simplified by dividing both numbers by 5 to get 7:9 ratio.
The ratio 35 can be expressed as a fraction, which is 35:1 or simply 35/1. Any equivalent ratio can be found by multiplying both terms by the same non-zero number. For example, multiplying by 2 gives the equivalent ratio 70:2.
It is 35/26.
The ratio of 65 to 35 can be simplified by dividing both numbers by their greatest common divisor, which is 5. This results in a simplified ratio of 13 to 7. Therefore, the ratio of 65 to 35 is 13:7.
The Daily Show - 1996 Vin Diesel 11-35 was released on: USA: 16 March 2006
It is 20/35 = 4/7.
35 out of 100 as a ratio as a fraction in simplest form is 7/20.
The ratio of 35 to 55 can be simplified by dividing both numbers by their greatest common divisor, which is 5. This gives us 35 ÷ 5 = 7 and 55 ÷ 5 = 11. Therefore, the simplified ratio of 35 to 55 is 7:11.
35:60, 7:12