0
What else can I help you with?
Advantages of microprocessor based system?
There are many different advantages of a microprocessor based system. Some of these include that it only uses 3 components so it is simple to use and install and it will increase your memory.
What are the advantages and disadvantages of being a marine engineer?
advantages- IT IS BEST FOR TRAVEL WITH HIGH SALARY.disadvantages of being a marine engineer- AWAY FROM HOME 4 MANY DAYS, AND BELIEVE ME THE JOB IS HELL 4 ONES NOT ADDICTED TO SEA.
What are the 4 possible causes when the motor frame heats up?
1. Over load,2 Single pahse situation, 3. misalgnment, 4. Wornout bearing
What is stronger a 4 inch X 2 inch steel tube or 4 inch steel channel over a 5 foot span?
I assume you mean a 4 x 2 square tube that is loaded in the direction of the 4 inch dimension; then it is stronger than a 4 inch channel with flange width of 2 inches loaded in the direction of the 4 inch dimension, because the square tube has more inertia
Why do studs need to be so far apart?
Studs need to be spaced quite far apart in order to provide sufficient structural support for the wall. This spacing helps distribute the weight and load of the wall evenly, ensuring its stability and strength. It also allows for the installation of insulation or other materials between the studs to improve the wall's energy efficiency.
Where buy studs?
you can buy studs on ebay for about 2 to 4 dollars with free shipping
How many 2 x 4 studs for 20 foot wall?
17!
What are the advantages of 4 wheelers over 3 wheelers in terms of vehicles?
There are a variety of different advantages of 4 wheelers over 3 wheelers in terms of vehicles. Some of these advantages are that 4 wheelers are much safer than 3 wheelers.
How many 2 x 4 studs do you need for a room that is 16 x 16?
Studs are normally on 16 inch centerlines, so, with 16 feet being 192 inches, you would need 12 plus 1 (for the starting stud) plus 2 (for the top and bottom plates) per wall. That is 15 studs per wall. Multiply that by 4 and you get 60 studs for the room. This doing not count framing for doors and windows, nor does it count studs for the floor and ceiling. If you get 16 foot studs, you can use 8 for the caps, leaving you needing 52 studs that are 8 foot long, so you would need 26 16 foot studs to make the 52 8 foot studs. The total required studs, then, is 34 16 foot studs.
What are the release dates for Studs - 1991 1-4?
Studs - 1991 1-4 was released on: USA: 1991
You need to cut 2 x 4 x 8 long studs to the proper length to make a finished wall of 8' in height Underneath the studs there will be plate that's to what length should you cut the studs?
92 5/8"
What is the simplest form of 4 and 2 over 4?
4 over 4 is 1 and 2 over 4 is 1 over 2
How many wheel studs on a astra van envoy 1.7dti?
1998 - 2004 4 studs
What are the various lenghts of 2 x 4 studs?
A 2 x 4 'stud' is technically 92-1/2 inches. All other 2 x 4 lengths are 'boards' of 96, 120 and 144 inches.
What can 2 over 4 be simplifed to?
2 over 4 can be simplified to 1 over 2.
What are the release dates for Renegade - 1992 Studs 4-9?
Renegade - 1992 Studs 4-9 was released on: USA: 13 November 1995
What 2 over 4 simplified?
4 over 2 simplified is 2 over 1
