0
What else can I help you with?
Can Geothermal pumps can be used for heating or cooling?
cooling
What are all the methods to trapping co2?
Some methods of trapping carbon dioxide are: electrochemical reduction, cooling it into a liquid, and passing the gas through an alkali.
What is the difference between Cooling Energy and Cooling Load?
Cooling energy depends on the efficiency of cooling device used but cooling load depends on many factors such as the volume of the room, comfort band, fabrics used, geographical and climatic properties of location that the room is built. In simple terms, for a room with a specific cooling load different devices can be used. Since, each device has different efficiency, therefore different amounts of cooling energy may be obtained.
How is a three way valve used?
Used on heating/cooling systems. Allows uninterrupted circulation through heating/cooling unit or heating/cooling system using 3-way valve.
What makes of fan can be used for cooling and heating?
The most notable fan used for both heating and cooling would probably be of the Dyson brand. They have a product called the Dyson Hot+Cold, which is a bladeless heater fan used for both cooling and heating.
What three methods or devices are used to cool a CPU?
Passive and active air cooling and liquid cooling. What three methods or devices are used to cool a CPU
What cooling methods are used for an open machine?
For an open machine thermal conduction and air-cooling are the only methods possible, sometimes with a fan to boost the flow of air.Oil-cooling and water-cooling can only be used on closed machines.
What are the cooling methods used on a drip-proof machine?
Some common cooling methods used on drip-proof machines include natural convection cooling, forced air cooling using fans, liquid cooling through a closed loop system, and heat sinks for dissipating heat. The choice of cooling method depends on factors such as the machine's power, size, and operating environment.
How do you replace a alternator on a 2002 deville?
you have to remove the radiator and the a/c condenser to pull alternator also cooling fans
Identify extreme methods of CPU cooling?
Phase change cooling Liquid Immersion
How do you slow down particles?
Particles can be slowed down through various methods, such as cooling them using techniques like laser cooling or evaporative cooling. These methods lower the kinetic energy of the particles, causing them to slow down. Magnetic and optical traps can also be used to confine and cool particles to reduce their speed.
Does a sink count as technology?
Heat Sink used on Processors and Chips are technological developments as they are majorly responsible for enabling heat dissipation effeciently, produced by processor and chip components. Sinksare subject to improvements in designs and methods of cooling.Two mostly used methods are Air Cooling & Liquid Cooling Systems.
What car part starts with A?
Alternator air conditioner air cooling system
Where is the cooling temperature sensor at 2004 blazer?
If you mean coolant temperature sensor.... ITs on the driver side, behind the alternator. Must remove the alternator!
What is Proper cooling consists of the following methods except?
Proper cooling consists of methods such as refrigeration, ice bath, and blast chilling. Not a proper method for cooling is leaving food at room temperature to cool down.
Will covering an alternator with aluminum foil cause any damage to the alternator?
Yes it could, a alternator has air passages in its case to allow for cooling. If those holes are blocked the alt. could overheat and fail.
What modern methods were used for food preservation?
-vacuum packing -heating -freezing -cooling -boiling -waxing -smoking -drying -bottling and canning -
