0
What else can I help you with?
What are the main differences between FETs and BJTs in terms of voltage gain?
Bipolar Junction Transistorscurrent controlleduse both holes and electrons as carriershave three terminals called the emitter, base, and collectoronly available in one mode of operationField-Effect Transistorsvoltage controlled (like vacuum tubes)use either holes or electrons as carriers, not bothhave three or four terminals called the source, gate, drain and sometimes substrateavailable in either enhancement mode or depletion mode of operation
What are the Differences between horn antenna and waveguide?
waveguide is a metal pipe that contains and guides microwaves from place to place in a microwave system (e.g. oscillators, amplifiers, mixers, modulators, filters, antennas)horn antenna has a waveguide connected at its focus, in transmit mode the waveguide feeds the horn which then emits a microwave beam, in receive mode the horn collects a microwave beam and concentrates it int the waveguide
What is the difference between courier mode and cargo mode?
In Courier mode there are certain weight restriction and also clearance of goods is done by courier company through which goods is being dispacthed, whereas in cargo mode the clearance of goods can be done by buyer. I am also not 100% sure of the answer.
What is the power saving mode on your computer called?
run, the computer is doing calculations normally (maximum power consumption)sleep, the computer is not doing calculations but maintains DRAM refresh to retain data internally (low power consumption)hibernate, the computer is not doing calculation but saved DRAM to a disk file so that DRAM refresh can also be stopped (minimal power consumption, often the computer actually turns off in this mode)
Why the te10 mode is the dominant mode in rectangular waveguide?
TE10 mode is the dominant mode with a>b, since it has the lowest attenuation of all modes. Either m or n can be zero, but not both.
What is difference between minimum mode and maximum mode of 8251?
The 8251 is a USART (Universal Synchronous Asynchronous Receiver Transmitter). It does not have a minimum and maximum mode.
What are the modes of 8086?
minimum mode and maximum mode
Which pin of 8086 will diffrenciate between minimum mode and maximum mode?
The MN/MX- ping on the 8086 is pin 33.
What is the range Mode median maximum and minimum of 3335728291215 1130?
The range of a single number is 0.The mode, median, maximum and minimum of a single number is the number.
What is the range mode median maximum minimum of three?
Range = 0Mode = 3 Median = 3 Maximum = 3 Minimum = 3
How many operating modes does 8086 have?
*minimum mode *maximum mde
What is the mode the maximum minimum and the range?
The mode is the value that appears most frequently in a data set. The maximum is the highest value, while the minimum is the lowest value in that set. The range is calculated by subtracting the minimum from the maximum, indicating the spread of the data. Together, these measures provide insights into the distribution and variability of the data.
What is the median mode and range in math?
the median is when you put all the numbers in order from least to greatest and find the middle one the mode is the number that occurs most often and the range is the difference between the minimum and the maximum
How do you range mode and median?
Range: maximum number minus the minimum number Mode: The number that occurs the most Median: the middle number
HOW 8088 has segment arrangement in its two modes?
The two modes of the 8086/8088, minimum mode and maximum mode, have nothing to do with segment arrangement. The modes determine which pins on the chip have which functions. In minimum mode, certain pins are sacrificed in favor of a smaller implementation. In maximum mode, those pins take on other functions, and the original functions are generated by the Bus Controller chip.
What characteristics do data sets share when they have the same range?
The minimum and maximum are the same. The mean, median, and mode can be different.
Diffrentiate between minimum mode and maximum modes in 8086 processors?
1:in min mode mn/mx- is connected to vcc .here now mn will be one AND IN MIN MODE ONLY ONE PROCESSOR IS PRESENT WITHOUT ANY CO PROCESSOR . 2: in max mode mn/mx- is cnnected to ground now the mx will become 1. AND IN MAX MODE MANY PROCESSORS ARE CONNECTED TO EACH OTHER WITHOUT ANY CO PROCESSOR EX FOR COPROCESSOR IS 8284 1:in min mode mn/mx- is connected to vcc .here now mn will be one AND IN MIN MODE ONLY ONE PROCESSOR IS PRESENT WITHOUT ANY CO PROCESSOR . 2: in max mode mn/mx- is cnnected to ground now the mx will become 1. AND IN MAX MODE MANY PROCESSORS ARE CONNECTED TO EACH OTHER WITHOUT ANY CO PROCESSOR EX FOR COPROCESSOR IS 8284
