2 x 5^2
If a load takes 50 kW at a power factor of 0.5 lagging calculate the apparent power and reactive power Answer: Apparent power = Active power / Power Factor In this case, Active power = 50 kW and power factor = 0.5 So Apparent power = 50/0.5 = 100 KVA
using vienna rectifier
The units of Mpa is N/mm2 so this means that the concrete can resist a compresion forse of 50 newtons spread over 1 mm2 *Note if this value is a measured value a safety factor needs to be applied if it is to be used in construction, this factor are specified in you country's design code
You do not need a function to determine the lowest common factor of two numbers. The lowest factor of any one number is 1. The lowest common factor of any two numbers is therefore 1 as well.
late 50's early 60's depending on where you live. Cost is the biggest factor. Both in material and labor. Much faster and cheaper to use plywood and carpet. Also cheaper carpet that most people wanted at the time.
Multiplying each factor by powers of ten
50 = 2 x 5 x 5
10(2k + 5)
No, 50 is a factor of 400.
No, 9 is not a factor of 50.
The factor tree of 50:5025,25,5,25025,25,5,2
No, 25 is a factor of 50.
If put in order then the last factor of a number is the number itself. So, 50 is the last factor of 50.
Since 50 is a factor of 200, it is automatically the GCF.
The greatest common factor of 50 and 1,500 is 50.
One is the only factor of 50 that is a cube.
greatest common factor of 33 and 50 = 1