0
What else can I help you with?
When was total station survey equipment invented?
Ferhan ahamed
What is error code e-03 on topcon 303 total station?
Error message displayed when an internal problem presits. You have to turn off and then back ON total station just before starting to operate...If the problem was not fixed this way you have to send your instrument for repair.
What are the differences between soil bulk density and particle density?
Bulk density is the dry mass of the solids (M sub t) / total volume (V sub t) Particle density is bulk density (P sub b) / 1 minus total porosity (1-theta).
What is the function of total station?
Sorry i am still an amateur. The function of a total station in a construction site have various use. Some of the most common are COGO, mapping & stake-out. But the first and foremost of total station is to measure angle & distance, which can then be calculated coordinates (XYZ or NEZ)
How is a telecommunication tower's verticality measured?
Hire Some Surveying Company and do it with Total Station which will give you the accuracy of 1 mm/ 0°00'10"
What is the difference between thedolite and total station?
A theodolite is a surveying instrument used to measure horizontal and vertical angles. It requires a separate instrument to measure distances. A total station is a surveying instrument that combines the functions of a theodolite and distance measuring device, allowing for simultaneous measurement of angles and distances.
What is the diffrence between thedolite and total station?
A theodolite is a surveying instrument used for measuring horizontal and vertical angles, typically with a rotating telescope. A total station combines the functionality of a theodolite with an electronic distance measurement (EDM) device to measure angles and distances simultaneously. Total stations are more advanced and versatile than theodolites.
What is work of total station in field?
A total station is a surveying instrument used to measure and record coordinates of points in the field. It combines a theodolite for measuring angles with a distance measuring device to calculate positions accurately. The data collected by a total station can be used to create detailed maps, perform land surveys, and monitor construction projects.
How do you check telecom tower verticality y using Thodolite?
*find a theodolite or total station *check for collimation *check theodolite vertical axis *set up the theodolite a distance away from the foot of the tower, or closer but using a diagonal eye piece *use left face to bisect bottom point and clamp the horizontal plate *check the tower zenith transit and use the right face to bisect the bottom point and do as explained above *dont forget to record readings of every stage.
What is the difference between the principle of Tacheometric survey and Totalstation survey?
The main difference is the method of measuring distances. Tacheometry is optical. A total station uses electromagnetic waves. Distances measured using Tacheometry are determined by multiplying the difference in readings to a levelling staff between the upper and lower stadia hairs, by a constant (usually 100). A Total station, by definition, is a theodolite with a built-in EDM measuring device. This sends out a signal of a known wavelength to a reflector and calculates the distance by measuring the time it takes for the signal to return.
What is the meaning of total station?
What is the meaning of total Station?
What are the basic measurements surveying?
Basic measurements in surveying include distance, elevation, and angles. Distance is typically measured using instruments like a tape measure or electronic distance meters. Elevation can be determined using a level or GPS equipment, while angles are usually measured with a theodolite or total station.
What is the distance between New York Penn Station and Union Square?
The distance between New York Penn Station and New York Union Square is walkable. The total distance on foot is 1.65 miles
What is least count of total station?
The least count of a total station typically refers to the smallest measurement increment that can be displayed and recorded by the instrument. This value is determined by the precision of the internal components and the software of the total station, which can vary between models and manufacturers. Common least count values for total stations range from 1 second to 5 seconds.
Where is the total station training institute in Delhi?
which institute gives training in total station in new dehli
How does the total station work?
there are many total station machine with different specification. now gps, robotic total station available they work with one person. easy way to survey of land.
What is the relationship between the differences in height of a ramp and the total distance an object can travel starting at each height?
This is a bad question.
