0
The stator and rotor of a machine are not made from sold pieces of metal. They are constructed by clamping stacks of thin sheets of silicon steel, called 'laminations', together. Laminations are essential to minimise circulating currents due to voltages induced into the core/rotor when the machine is operating. These laminations are created by a stamping machine, which cuts the required shape from large sheets of thin metal.
What else can I help you with?
What did means by the stray losses in induction motors or transformer or generator?
Stray losses refer to secondary voltage to be inappropriately distributed to transformers, induction motors and generators. Stray losses essentially mean that there is leakage that causes a weakening of the voltage being delivered to the motor.
How do you use the word manufacture in a sentence?
you can buy manufactured food made from a factory.if you see the word manufcture on a jar, container, etc. its made from a factory.YOUR WELCOME FOR THE SENTENCES ENJOY THEM AND GET AN A+!
Why resistor needed to know the characteristics of diode?
The resister always being used to save components to damage by absorbing extra voltages, diode works on 0.7 volts n usually having 15 volts from the source so extra voltages drops across the resister and it works safely.
What is C99?
The ISO C standard that came into being in 1999.
How emf is induced in dc motor?
In brief,in a 3 phase SQIM,there are 3 windings per pole in the stator physically 120 degree apart,each of which is fed from per phase of a balanced 3 phase ac supply.As the magnetic field due to current in each winding varies with time as the current is alternating,the resultant field will be found to keep on changing its direction with time in a circular locus,magnitude being constant because of this setup which can be shown mathematically.Thus a rotating flux of constant mag links the rotor which induces an emf in the rotor,though initially both rotor & stator are static.Another AnswerA three-phase induction motor is, essentially, a transformer. The 'primary' windings being the stator's field windings, and the 'secondary' winding being the bars of the rotor. For this reason, induction motors are often termed 'rotary transformers'. So emfs are induced into the bars by 'transformer action'.Unlike a 'static' transformer, however, the secondary voltages and the frequencies of the voltages vary with the speed of the rotor.
Is a standard cooktop or an induction cooktop better?
An induction cooker uses induction heating for cooking. Unlike other forms of cooking, heat is generated directly in the pot or pan cooking vessel, as opposed to being generated in the stovetop by electrical coils or burning gas
Are high standard 22 pistols still being made?
Yes, although the current company known as High Standard is not the original High Standard Manufacturing Company, which folded in 1984. But it's the same pistols being manufactured currently, although there may be some cosmetic variances.
Where are Tory Burch shoes manufactured?
the shoes used to be manufactured in LA and Brazil. Currently her products are being manufactured in China.
What is the induction mean?
Leading or drawing; persuasive; tempting; -- usually followed by to., Tending to induce or cause., Leading to inferences; proceeding by, derived from, or using, induction; as, inductive reasoning., Operating by induction; as, an inductive electrical machine., Facilitating induction; susceptible of being acted upon by induction; as certain substances have a great inductive capacity.
When being induced and waters are broken What is the next stage?
Depends on how the induction is going
Are Linytron televisions still being manufactured?
No.
What is the difference between orientation and induction?
INDUCTION is a primary introductory course mostly designed by organizations for their new appointees to acclimatize themselves with the new office environment and organizational structure, whereas TRAINING is imparted to the employees with some experience in the organization to enhance their knowledge, skills to improve quality of service. There is not a huge difference between orientation and induction. Induction is the being accepted and orientation is being shown what to do once inducted.
What is the meaning of inductive?
Leading or drawing; persuasive; tempting; -- usually followed by to., Tending to induce or cause., Leading to inferences; proceeding by, derived from, or using, induction; as, inductive reasoning., Operating by induction; as, an inductive electrical machine., Facilitating induction; susceptible of being acted upon by induction; as certain substances have a great inductive capacity.
What years was the Ford King manufactured?
The Ford King was manufactured initially in 1998, and is still being manufactured in present day 2010. There are plans for a 2011 model.
Where the guns being manufactured?
Every corner of the globe
When was the Selmer trumpet with serial number 78116 manufactured?
Best estimates put this trumpet as being manufactured after 1984.
Does the Saturn Ion come flex fuel capable?
The Saturn Ion was never flex fuel capable when it was being manufactured. The Saturn Ion is no longer being manufactured.
