answersLogoWhite

0

A wheelbarrow is a small hand-propelled vehicle, usually with just one wheel, designed to be pushed and guided by a single person using two handles to the rear or a sail may be used to guide the ancient wheelbarrow by wind.

It is designed to distribute the weight of its load between the wheel and the operator so enabling the convenient carriage of heavier and bulkier loads than would be possible were the weight carried entirely by the operator. As such it is a second-class lever. Traditional Chinese wheelbarrows, however, had a central wheel supporting the whole load. Use of wheelbarrows is common in theconstruction industry and in gardening. Typical capacity is approximately 170 litres (6 cubic feet) of material.

A two-wheel type is more stable on level ground, while the almost universal one-wheel type has better maneuverability in small spaces, on planks or when tilted ground would throw the load off balance. The use of one wheel also permits greater control of the deposition of the load on emptying.


From: http://en.wikipedia.org/wiki/Wheelbarrow

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

Where were wheelbarrows invented?

They can be traced back to ancient China. See the related link for more information.There is archeological evidence that the ancient Greeks had wheelbarrows about 2400 years ago in 407 B.C. The Chinese are known to have wheelbarrows about 600 years later, around 210 A.D.


How many wheelbarrows of aggregate are in 1 cubic metre of concrete?

The number of wheelbarrows of aggregate in 1 cubic metre of concrete depends on the size of the wheelbarrow and the aggregate's density. Typically, a standard wheelbarrow holds about 0.1 cubic metres of material. Therefore, you would need approximately 10 wheelbarrows of aggregate to fill 1 cubic metre of concrete, assuming the wheelbarrow is filled to capacity.


Are wheelbarrows made of steel?

some are, others are made of plastic, it all depends on the manufacturer


How many wheelbarrows in 1 cubic meter of 19mm stone?

The number of wheelbarrows in 1 cubic meter of 19mm stone depends on the size of the wheelbarrow. A standard wheelbarrow typically holds about 0.1 cubic meters of material. Therefore, you would need approximately 10 wheelbarrows to transport 1 cubic meter of 19mm stone. However, this may vary slightly based on the exact dimensions of the wheelbarrow and the compaction of the stone.


How many wheelbarrow make a tones?

The number of wheelbarrows needed to make a ton depends on the wheelbarrow's capacity and the material being loaded. A standard wheelbarrow typically holds about 6 cubic feet of material, and since a ton is approximately 27 cubic feet, it would take about 4 to 5 wheelbarrows to equal a ton, depending on the density of the material. For lighter materials like leaves, you might need more wheelbarrows, while for denser materials like gravel, you might need fewer.

Related Questions

Does Ace Hardware in Arlington, TX carry wheelbarrows?

All hardware stores sell wheelbarrows. Ace sells a range of wheelbarrows starting at 60$ for a small wheelbarrow. They also sell heavy duty carts and wheelbarrows.


How many wheelbarrows in 2.2 ton?

Depends really how big the wheelbarrows are and how much they weight.


Did the Romans use wheelbarrows?

No Romans did not use wheelbarrows the wheel barrows were practicaly invented after.


Why are wheelbarrows important?

Wheelbarrows are used to tansport heavy or otherwise unyieldy loads. They were instrumental in technological advancement.


How many wheelbarrows were taken on the First Fleet?

According to the weblink below, there were 40 wheelbarrows on the First Fleet.


How many wheelbarrows of sand can you get from a 1 ton van?

18


Did pioneers use wheelbarrows?

no?


Where could one purchase wheelbarrows?

Wheelbarrows are practical gardening tools; therefore, a person may purchase wheelbarrows at a store that sells gardening supplies. Wheelbarrows may also be bought online from sites such as Amazon and Lowes.


How many wheelbarrows are in one tipper?

Oh, isn't that a lovely question! Well, a tipper truck can typically hold around 6 to 8 wheelbarrows, depending on their size. Just imagine all the beautiful flowers or soil you could transport in all those wheelbarrows! Just remember, there's no mistakes, only happy little accidents in the world of wheelbarrows and tippers.


Are barrels second class levers?

No, but wheelbarrows are.


How many wheelbarrows sold yearly?

It depends on the company and market conditions, but on average, a company may sell thousands to tens of thousands of wheelbarrows each year. Factors such as demand, competition, and marketing efforts can all influence the number of wheelbarrows sold annually.


Where were wheelbarrows invented?

They can be traced back to ancient China. See the related link for more information.There is archeological evidence that the ancient Greeks had wheelbarrows about 2400 years ago in 407 B.C. The Chinese are known to have wheelbarrows about 600 years later, around 210 A.D.