The capacitor size for a 5 kVA generator typically depends on the power factor and the specific application. A general rule of thumb is to use about 0.5 to 1 microfarad (μF) of capacitance per kVA for power factor correction. Therefore, for a 5 kVA generator, you might consider a capacitor size ranging from 2.5 μF to 5 μF. However, it's essential to consult with a professional or refer to the generator's specifications for precise requirements.
with the help of function generator we found wave in oscilloscope
Read the capacitor that you remove
Cable sizing is based on amperage of the load. The rating of the capacitor bank and the voltage at which it operated need to be stated to give an answer.
A 6kVA generator puts out 4.8kW (4800 watts) with a power factor of 0.8 Formula w (watts) x pf (power factor) = VA (volt amps) This generator will be able to draw a load of 20A (amps) 6kVA = 6000VA. Where watts is only a measurement of "real power" used (eg: Heater element) VA is a measurement of total current that will flow through a circut. (eg: capacitor) A capacitor does not use power (kW) but current does flow in a circut where capacitor is connected. kVA ratings would be used to size cables.
Capacitors come in various sizes, your question is to non specific (capacitor for WHAT) for a detailed answer.
with the help of function generator we found wave in oscilloscope
Prices vary for a Yamaha Generator depending on the size of the generator. The more wattage involved, the more you will need to pay. First you need to determine the size of generator you need then contact a local retailer.
35mfd/440V
Click the link. There you can figure the size generator you need.
It takes 1 farad for every 1000 watts so u need 2 farads.
You need a 5.5kw generator to run a 5.5kw motor.
You would need at the minimum a 56 KW generator. In reality you would need a 60KW.
Read the capacitor that you remove
When determining the size of a capacitor for your project, consider factors such as the voltage requirements, capacitance value, size constraints, and the intended use of the capacitor. It is important to choose a capacitor that can handle the voltage and provide the necessary capacitance for your project while fitting within the physical space available.
Cable sizing is based on amperage of the load. The rating of the capacitor bank and the voltage at which it operated need to be stated to give an answer.
The best home standby generator will vary from home to home. You will need to determine what you need to power, how many appliances, size of your home etc.
The size of the generator is based on the size of the load you want to supply. Size up the load in watts or amps along with what phase (single or three) and voltage that the load requires. These are needed to give a complete answer.