If this refers to a wire wound transformer, as it sounds then there is likely only two possibilities : the input voltage has dropped prier to entering the primary windings or there is a short in the windings some where within.
The only other possibility I can think of is : This is a trick question and the transformer is a step down transformer.
Transformer
Through the use of the basic transformer voltage equation.
since we need to get desired or rated voltage, so if it is connected in high voltage side of the transformer, voltage supply will be more, and hence the current will be more than the required amount. this is the reason why the instruments re connected at the low voltage of the transformer while performing no load test.
transformer is busted; if input voltage is normal you have short circuit or open circuit somewhere
If the bed lamps use a low voltage bulb then the type of transformer will be a step down transformer.
Transformer
Through the use of the basic transformer voltage equation.
A transformer
if the transformer is distributing transformer then we shoud have to give more prefer to the high volatage to reduce losses if we distibute power at low volage there is more current which causes more losses and in hv system there is high volage and low is current so the losses are also low
A low voltage transformer can be purchased from Amazon and eBay. In the UK, low voltage transformers can also be purchased from Maplin which is a physical shop.
When selecting a low voltage landscape transformer for outdoor lighting, key considerations include the transformer's wattage capacity, voltage output, compatibility with the lighting system, durability, weather resistance, and ease of installation.
the inductive load which is generally use in high voltage transmission line known as transformer. the transformer transform the high voltage to low voltage.
The low voltage needs to be stated of the 20 watt lamps.
since we need to get desired or rated voltage, so if it is connected in high voltage side of the transformer, voltage supply will be more, and hence the current will be more than the required amount. this is the reason why the instruments re connected at the low voltage of the transformer while performing no load test.
When selecting a low voltage transformer for a 300 watt application, key considerations include ensuring the transformer can handle the wattage capacity, selecting the appropriate voltage rating, considering the efficiency and size of the transformer, and ensuring compatibility with the electrical system and safety standards.
A welding transformer uses the alternating current supplied to the welding shop at a high voltage to produce the low voltage welding power
transformer is busted; if input voltage is normal you have short circuit or open circuit somewhere