0
What else can I help you with?
Outer earA device called an oscilloscope can be used to demonstrate?
waveforms...(apex)
The control that is used to display text in other parts of a visual basic application?
Text box.
How is a oscilloscope used?
The cathode ray oscilloscope is basically a measuring instrument. Time period of any sinusoidal signal can be measured along X-axis.Other applications of CRO is the calculation of peak to peak voltage,current of any signal and the phase difference between the two signals can also me determined.The uses of the oscilloscope are as follows:To display the wave forms of ac and dc signals.It helps to specify the amplitude of the signal on the y-axis and the period on the x-axis.
Can you used cathode ray oscilloscope as television?
Yes, some could be used for analog monochrome TV but lots of extra circuits would be needed. Picture would be green. Cost of oscilloscope would likely be several times a portable analog TV of similar size, even before adding extra circuits.
When a signal of 10 mV at 75 MHz is to be measured then What instruments can be used?
When a signal of 10 mV at 75 MHz is to be measured then which of the following instrument can be used -
What does the term oscilloscope mean?
The meaning of the word oscilloscope is a device used for viewing oscillations, electrical current or voltage or, with a display on the screen of a cathode-ray tube.
A testing instrument that's used to measure electrical signals in a circuit and display them as waveforms on a screen is called?
an oscilloscope
What is the purpose of the voltage divider control in oscilloscope?
This control reduces the amplitude of the applied signal to a point where the whole signal can be displayed on the oscilloscope screen. The amount of voltage reduction is marked on this control switch so that it can be used as a voltmeter.
What apparatus display sound waves?
-- A strobe light can display the mechanical vibrations in a material that generates or responds to sound, such as a loudspeaker cone, a tuning fork, or a guitar string.-- An oscilloscope can display a graph of sound vibrations, if they're first intercepted and converted to an electrical signal by means of an appropriate transducer, such as a microphone.
Which oscilloscope control is used to move the trace up and down the screen vertically?
More than likely, it is the DC Offset.
What is the use of the 'sync control' in a CRO?
The 'sync control' in a CRO (cathode ray oscilloscope) is used to synchronize the horizontal sweep of the electron beam with the input signal. This helps to stabilize the waveform display on the screen by ensuring that it starts at the same point for each cycle of the input signal. It allows for accurate and repeatable measurements to be taken.
What are oscilloscope probes use for?
Oscilloscope probes are used as part of an Oscilloscope. These are the pieces that connect to your circuit in which you would like to measure its sine waves.
What is the purpose of the grid and X and Y-plates in cathode ray oscilloscope?
The grid in a cathode ray oscilloscope controls the electron beam that creates the waveform display. The X-plate and Y-plate are used to deflect the electron beam horizontally and vertically to create the waveform pattern. This allows the oscilloscope to accurately display and measure various electrical signals.
What is the difference between a monitor and a visual display unit?
A visual display unit (VDU)is the generic term used for all types of visual display screens etc. A monitor is one type of visual display unit. Other types include projectors, oscilloscope, autostereoscopy (3D) etc
What is Difference between dual trace oscillosope and dual trace generator?
Oscilloscope is used to display electrical signals on a display. A dual trace oscilloscope can display two signals simultaneously. For a trace generator I think you mean a signal or a function generator which generates electrical waveforms of varying shapes, frequency and amplitude. A dual trace or a function generator in that sense is an equipment capable of generating two independent waveforms at the same time. - Neeraj
Why is cathode ray tube considered the heart of an oscilloscope?
Well, a CRT used to be the only practical display device for an oscilloscope (as a CRT was also the only practical display device for a television), but now flat panel displays (e.g. LCD, LED) have replaced the CRT in many oscilloscopes (as they have in television) because they are lighter weight, more compact, and are becoming less expensive than CRTs.
A device used to electronically show the crest and trough of sounds?
An oscilloscope is a device used to electronically display the crest and trough of sound waves as visual representations. It shows the waveform of the sound signal as it changes over time, helping in the analysis and troubleshooting of audio signals.
