One doesn't need a degree to become a welder. To be a certified welder , grade 12 high school will do. The math is an important part. The written tests contain quite a bit of math, example trigonometry, fractions, Pi, etc.. One must be able to calculate areas of shapes, add-subtract dimension's, everything to do with a three dimensional object / structure. Also having a working knowledge of the way the world works, or common sense. Usually gained through higher learning.
According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.
The wire size depends on the amperage, not the voltage. The fact that the welder runs on 440 volts does not affect the wire size! You need to ask this question instead: What size wire do you need for a three phase welder on an eight foot run if the nameplate amps are 45A?
What is the yearly wage of a welder? What is the yearly wage of a welder? What is the yearly wage of a welder?
SP welder means Structural purpose welder.
The proper ampere rating of a circuit breaker for an electric arc welder depends on the arc welder. Each is different. Look at the nameplate on the arc welder and choose the circuit breaker and wiring accordingly.
Although rig welder jobs do not all require a graduate degree, it is much easier to get hired with the degree. Therefore a graduate degree is strongly recommended for those wishing to find a job
According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.
A welder makes around 30,000 dollars a year. If they work overtime, they can make quite a bit more. This is a job where overtime is often available.
You can find a job as a welder in numerous places. You can get a job welding (especially if you have any certifications or degree's) for the military, mechanic shops, motor cycle shops, and many other careers.
In order to weld pieces of 6mm steel you can use any type of welder. Depending on how strong and how pretty the weld needs to be will determine the type of welder you choose.
A wire feed welder typically requires a voltage of around 220-240 volts for operation. It is important to check the specifications of the specific welder model you are using to ensure it is compatible with the power supply available.
You will need a 'step up transformer' but it is important to provide the details on the information panel of the welder before ordering
The wire size depends on the amperage, not the voltage. The fact that the welder runs on 440 volts does not affect the wire size! You need to ask this question instead: What size wire do you need for a three phase welder on an eight foot run if the nameplate amps are 45A?
Yes because you may need to figure out where to weld by using math
When you refer to a 200 amp welder you are talking about the output side of the welder. What you have to do is find out what the input voltage and current of the welder is to calculate the size of a generator needed to operate the welder.
you dont need to go to callege you just need expereance. and you can get tips from a profesional
What is the yearly wage of a welder? What is the yearly wage of a welder? What is the yearly wage of a welder?