ADC analog digital converter
FDM stnds for frequency division multiplexing and it is used only in case of analog signals because analog signals are continuous in nature and the signal have frequency. TDM-stands for time division multiplexing and it is used only in case of digital signals because digital signals are discrete in nature and are in the form of 0 and 1s. and are time dependent.
In datacommunications this is a modulator/demodulator, commonly known as a modem. In electronics a digital to analog converter (DAC) chip is used to convert digital signals to analog and an analog to digital converter (ADC) chip to convert analog signals to digital. Some chips are available which include both ADC and DAC functionality. There are thousands of different types of DAC and ADC sytems and which one to use largely depends on how fast you want to do the conversion.
When you convert digital signal to analog, it is called as an analog signal. The device used is called digital to analog converter.
A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power
An amplifier is an electronic device used to increase the amplitude of electrical signals in sound production.
A digitizer graph can be used to convert analog signals into digital signals by sampling the analog signal at regular intervals and assigning numerical values to the sampled points. These numerical values represent the amplitude of the signal at each sampled point, allowing the analog signal to be represented in a digital format that can be processed and stored by a computer or other digital device.
In a telescope, CCD stands for Charge-Coupled Device. It is a sensor that converts light into electronic signals to create digital images. CCDs are commonly used in digital cameras and astronomical equipment for high-quality imaging.
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
The set top box that your provider gives you is what converts the Digital signal to the analog signal. The digital signal is compressed at the provider and sent to the end user. The "tuner" (which can be built into a tv, a set top box or a cable card) Then decompresses the digital signal and converts it into an analog signal. There is much more to this did not know how technical you wanted your answer.
A Digibox is a box that allows users to receive digital satellite television signals. This device is marketed to user in the United Kingdom, and internet services can also be used through this device.
It is a short word for microphone, used in recording the actual sound. it changes sound waves into electrical signals.
Transforming analog signals to digital is known simply as analog to digital conversion, sometimes shortened to A-D conversion.
FDM stnds for frequency division multiplexing and it is used only in case of analog signals because analog signals are continuous in nature and the signal have frequency. TDM-stands for time division multiplexing and it is used only in case of digital signals because digital signals are discrete in nature and are in the form of 0 and 1s. and are time dependent.
S/PDIF or Sony Philips Digital Interconnect Format is a standard/protocol that specifies transmission of audio signals from one device to another in digital format. Both coaxial electrical cable and an optical fiber cable can be used to carry signals in S/PDIF format. - Neeraj Sharma
An oscilloscope is a device that magnifies changes in electrical signals, displaying them as a graph on a screen. It is commonly used in electronics to visualize and analyze electronic signals.
A digital switchover is used to convert television signals that are designed for old tvs so that they will still function on advanced digital televisions.
Acctuators are devices used to convert digital signals to movement