0
Tolerance in size is the allowable amount of change in dimension. For example, you want to fabricate a shaft that is 2 cm in diameter plus or minus 2 millimeters. The 2 millimeters is the tolerance. Tolerance in position is the allowable amount of change in position. For example, you need to drill a hole in a wall and you drew a point in the place you want to drill, you are allowed to move as far as 2 millimeters from that hole to receive satisfactory results, this is a tolerance of 2 millimeters in position
What else can I help you with?
What are tolerances in measurements?
Engineering measurement tolerances are the permissible limits of variation in measurements. Example a piece of steel 25mm square where it would be allowed to be +.001mm or -.001mm on this size. The plus or minus is the tolerance
Where do you install a pressure equalizing valve?
Need more info - what is it for? What is the size of the pipe and the pressure differences you are trying to get?
Why is a contact screw fitted in an electric bell?
The screw adjusts the size of the gap between the spring attached to the armature and the circuit wiring. This gap has to be just the right size for the make-break action to work properly. Wear and tear and vibrations can alter the gap, or conceivably even large temperature differences, so an easy way to put it back is necessary.
Which function is the correct choice for moving blocks of binary data that are of arbitrary size and position in memory?
memcpy()
How do arrays differ from single memory position variables?
A single memory position variable can store only one value of its type. An array can store n number of values, where n is the size of the array.
Difference between basic size and nominal size of an assembly?
on the basis of nominal diameter with tolerances is called nominal size, while required size is called basic size
What is tha differences between a bird's egg?
Common differences are size and color.
Differences between modern and extinct crocodiles?
size
What are the differences between a nickel and a penny?
size and value
What are the main differences between walls?
Size and material its made of
Are there differences between the size of a men's and women's basketball?
Yes, a men's b-ball is bigger, its a size 7, women's is a size 6
Do the koala offspring have differences at birth?
There are no discernible differences between newborn koalas. At birth, they are all pink, hairless and about the size of a bean.
What are the main differences between an upright bass and a bass guitar?
The main differences between an upright bass and a bass guitar are their size, shape, and playing technique. The upright bass is larger and played in a standing position with a bow or fingers, producing a deep, resonant sound. The bass guitar is smaller, played in a seated or standing position, and typically played with a pick or fingers, producing a more defined and punchy sound.
What are tolerances in measurements?
Engineering measurement tolerances are the permissible limits of variation in measurements. Example a piece of steel 25mm square where it would be allowed to be +.001mm or -.001mm on this size. The plus or minus is the tolerance
What are the biggest differences between cats and dogs?
probably their size and how much they eat. It depends from animal to animal but those are probably the biggest differences.
What are the differences between prawns and shrimp?
The main differences between prawns and shrimp are their size, anatomy, and habitat. Prawns are typically larger in size, have branching gills, and live in freshwater, while shrimp are smaller, have plate-like gills, and are found in saltwater.
What are the differences between Venus and Eris the dwarf planet?
size, name, type, age and colour
