coherent light
No, analog signals do not consist of individual electrical pulses; instead, they represent a continuous range of values. Analog signals vary smoothly over time, reflecting changes in voltage, current, or other physical quantities. This continuous nature allows them to capture nuances in information, unlike digital signals, which are composed of discrete pulses representing binary values.
In case of TV broad casting, the Video Signal is not transmitted alone, but it accompanied by a number of other signals or pulses, which help the exact reproduction of the picture at the receiving end. These pulses include Blanking Pulses, Synchronizing pulses and Equalizing pulses. A combination of Picture signal and other Controlling signal or pulses is called Composite Signal. Thus Composite Video Signal may consist of Following Parts.Picture information (Data)Blanking Pulses (Delay Pulses)Vertical and Horizontal Synchronizing Pulses (controlling Pulses)Generally,A Combination of Data and Other Controlling Signal is Called Composite Signal .
Digital
Audio frequency is converted into electrical pulse, with the help of a diaphragm vibrating depending upon the electomagnetic pulses.
Your question is quite incomplete. If you want to convert a PwM (pulse width modulated) infrared signal, just pass on the width info to a fixed carrier wave (amplitude modulate it), and the job is done. At the other end, demodulate using standard If stage as in any superheterodyne radio reciever.
Yes, lasers convert electrical signals into pulses of light for transmission through optical fibers. This process involves modulating the intensity of the laser beam according to the incoming electrical signal, creating discrete light pulses that correspond to the data being sent. These light pulses travel through the fiber optic cables, allowing for high-speed data transmission over long distances with minimal loss and interference. This technology is widely used in telecommunications and internet infrastructure.
pulses
The part of the eye that directs nerve pulses to the brain is the retina. The retina contains photoreceptor cells, known as rods and cones, which convert light into electrical signals. These signals are then transmitted through the optic nerve to the brain, where they are processed into visual images.
No, analog signals do not consist of individual electrical pulses; instead, they represent a continuous range of values. Analog signals vary smoothly over time, reflecting changes in voltage, current, or other physical quantities. This continuous nature allows them to capture nuances in information, unlike digital signals, which are composed of discrete pulses representing binary values.
Tremor control therapy is a type of treatment using mild electrical pulses to stimulate the brain. These pulses block the brain signals that trigger tremor.
AM transmitters convert sound into amplitude modulated radio waves which am radios convert into electrical pulses which speakers convert into air waves that are converted into sound by our eardrum.
Infrared light is used in remote controls to transmit signals to electronic devices by converting electrical signals into infrared light pulses. These pulses are then sent from the remote control to a receiver on the electronic device, which decodes the pulses and carries out the corresponding command, such as changing the channel on a TV or adjusting the volume on a stereo.
An oscilloscope is a device that displays electrical signals graphically, showing voltage variations over time. It can capture and visualize signals such as waveforms, pulses, and frequency response for analysis and troubleshooting in electronics and circuit design.
Yes, light is the primary signal carrier in optical fibers. It travels through the fiber as pulses of light, typically in the form of laser or LED signals. Other signals such as electrical signals can be converted into light signals at the source and back to electrical signals at the receiving end.
In case of TV broad casting, the Video Signal is not transmitted alone, but it accompanied by a number of other signals or pulses, which help the exact reproduction of the picture at the receiving end. These pulses include Blanking Pulses, Synchronizing pulses and Equalizing pulses. A combination of Picture signal and other Controlling signal or pulses is called Composite Signal. Thus Composite Video Signal may consist of Following Parts.Picture information (Data)Blanking Pulses (Delay Pulses)Vertical and Horizontal Synchronizing Pulses (controlling Pulses)Generally,A Combination of Data and Other Controlling Signal is Called Composite Signal .
Three different methods of sending signals and codes are: electrical signals sent through wires, electromagnetic signals sent through radio waves, and optical signals sent through light pulses in fiber optic cables.
1000