Inductive reactance (X_L) is calculated using the formula (X_L = 2\pi f L), where (f) is the frequency in hertz and (L) is the inductance in henries. For a 1H inductor at 1Hz, (X_L = 2\pi(1)(1) = 2\pi \approx 6.28 , \Omega). Therefore, the inductive reactance to 1Hz in a 1H inductor is approximately 6.28 ohms.
Both straight and gay sexually. Bisexual.
Non-zero initial condition is called DC offset. DC offset is bad, and needs to be removed by HP filter as they cause distortion, non-linearity. If the mean/average amplitude of the wave is zero it has no DC-offset.
its the maxium value 0.707 RMS. Root mean square is conversion used to give you the DC equivalent Voltage, Current, and Power of an AC system. It converts AC ability to do work and represents it as a DC equivalent value.
The voltage in your house is AC. It is in the form of a sine wave that goes positive and negative 60 times a second. To charge a battery you need DC so you do an AC to DC conversion and then apply the DC to the battery charging circuit that applies the correct charging current to the battery and checks on the state of the charge.
I think it stands for First half of the year
It mean that dc is also a pulsuaiting dc
Between 1h and 1h 20m
The shortest flight duration is 1 hour 12 mins for the flight from Washington, DC (WAS) to New York, NY (NYC).
aziz
1h = 3600s 25200s x 1h/3600s = 7h
District of Columbia
district of Columbia
dydrek corporation.
District of Columbia
DC refers to the District of Columbia, which is not a state.
DC after a chiropractors name stands for Doctor of Chiropractic