to install pipes in attic or under floors depending on what type house you have,to pipe in a/c or heat whichever it may be
Yes cooling requires larger duct work. Typically you would size the duct work for the cooling system and heat will work fine as well
The answer is quite simple, your duct work is not insulated somewhere. What is happening is the really cold air is blowing through the duct work and where it is not insulated, its causing condensation to form. It then builds up and starts dripping. You can either go to a hardware store and ask them for duct wrap or just buy a roll of fiberglass insulation and wrap it around and secure with duct tape.
With duct tape I install and maintain duct work for a living if you want to seal the joints just wrap the tape around the duct. If you need to cover a hole you will need to screw a piece of metal on the duct over the hole and tape over the edges of your patch. this is the simplest and cheapest way I know to do it.
yes u can if u are good with duct work put a down draft furnace in a basement and pipe it up one floor well not recommended it will work i did this to help a lady get threw winter who had low funds and it has worked quite well u need to build a custom box for the furnace to sit on to make this work and pipe directly from box and use smallest duct work u can i.e mobile home duct work or 4 to 6 inch What you did is still a downdraft furnace
The air is returning at a lower velocity, so you need a larger size duct.
Yes cooling requires larger duct work. Typically you would size the duct work for the cooling system and heat will work fine as well
The best method for sealing duct work using duct tape is to clean the surface of the duct work thoroughly before applying the tape. Make sure the tape is tightly wrapped around the joints or gaps to create a secure seal. It is also recommended to use UL 181-approved tape for better durability and effectiveness in sealing the duct work.
"no bile duct dilation" means the diameter if the bile duct is normal.
If your apartment does not have duct work, the owner of the building has not had it installed. Perhaps they felt it would be too costly to install, or perhaps they are simply not interested in or see a need for duct work.
The essential duct work tools needed for a successful HVAC installation project include duct tape, tin snips, duct sealant, duct insulation, duct hangers, and a duct crimping tool. These tools are necessary for cutting, sealing, insulating, hanging, and connecting ductwork in a HVAC system.
In the word "product" the letters "~duct" are not a suffix and have no independent meaning.
I need to get some duct cleaning work done in an office building I just bought. Can I do this myself or do you recommend a specialist?
Diffrent color duct tape could work or sparkles.
lead
Do I need special tools for hood duct cleaning? Is regular duct cleaning type equipment satisfactory?
The answer is quite simple, your duct work is not insulated somewhere. What is happening is the really cold air is blowing through the duct work and where it is not insulated, its causing condensation to form. It then builds up and starts dripping. You can either go to a hardware store and ask them for duct wrap or just buy a roll of fiberglass insulation and wrap it around and secure with duct tape.
I work really long hours but need to get my ducts clean. How can I find someone who does residential duct cleaning in the evenings?