answersLogoWhite

0

Formed into a mass by heat and pressure

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is a sintered funnel?

A sinterd funnel is simply a funnel with a built in filter. The filter is sintered, I think that this means that small particles are compressed together (and heated ?) to form a single piece of material with many small holes. The sintered funnels I use are made of glass, a link to some images is below (not mine). http://curlyarrow.blogspot.com/2008/01/how-to-clean-your-sintered-funnel.html I have also used sintered polyethylene and sintered stainless steel for filtering.


What are vavle guides made of?

sintered iron or bronze


What sintered glass crucible made of?

Sintered glass crucible is a glass mesh used for filteration. It can be used instead of filter paper, and in fact it is preferrable to filter paper. Sintered glass crucible must be cleaned then dried to constant weig befoe it can be used to filter out precipitates such as silver chloride.


What pore size does porosity 4 sintered glass have?

Porosity 4 sintered glass typically has pore sizes ranging from 4 to 16 micrometers, with an average pore size of around 8 micrometers. The pore size distribution can vary depending on the specific manufacturing process and conditions used to produce the sintered glass material.


What is Sintered and Bonded ndfeb magnet?

Sintered NdFeB magnets are made by compacting and heating a mixture of neodymium, iron, and boron powders. This process results in a very strong and high-performance magnet. Bonded NdFeB magnets are made by mixing NdFeB powder with a polymer binder, which allows for complex shapes but with lower magnetic properties compared to sintered magnets.


What brake pads are best for BMW k1200s?

Brembo are the original fitment EBC brake pads work just as well and are half the price. Sintered pads are required for the front and the original fitment for the rear is non sintered.


Does avid make sintered or metallic disc brake pads for avid bb5?

see attached link.


What pore size is related with porosity 2 of sintered glass filter?

The pore size is the average 100 micrometers.


What is uranium dioxide used for?

Uranium dioxide sintered pellets are now the most important nuclear fuel around the world.


What has the author Fathalla M Ahmed written?

Fathalla M. Ahmed has written: 'Alloy deveopment in ferrous sintered components'


What has the author S A Bucha written?

S. A. Bucha has written: 'Upsetting forging of sintered composite powder rods and tubes'


What is sintered glass and its porosity?

Sintered glass is a glass mesh used for filtration. It can be used instead of filter paper, and in fact is preferable to filter paper. Its other advantage is that it is permanent so you can get various different pieces of glassware with sintered glass in it e.g. an enclosed filter suitable for filtration under nitrogen. As for the porosity.... Porosity of sintered glass is labelled by integers from 0-5 (viz. 0, 1, 2, 3, 4, 5) where 0 has a pore size of 160-250 micrometres and is considered course filtration, that is fluid will pass through it quickly and some finer solids will pass through. Whereas, porosity 5 has a pore size of 4-10 micrometers so even ultrafine solids will not pass through and liquids will drop through. I hope this is clear, makes sense and is helpful.