0
i think it holds all the engines heat while the engine warms up. that's why it does not make any power while it is closed. once the engine is up to temp. it opens and flows free again.....maybe???
nope it letts out the burt gass after the spark plug ignites the the compressed gas air mix. that's why the fuems come out of the exhaust
What else can I help you with?
Why do you need backpressure in your engine?
Back pressure regulates the release of exhaust into a slower stream that keeps the exhaust valve temperature more consistent.
Which is the difference between a level valve and level control valve?
The purpose of both the valves is same - that to maintain a certain level(in a vessel or tank...) Simple Level valve could be referred to an ON - OFF valve where as control valve could be referred to an analog type of valve. On - OFF valve is for a crude control of level, while control valve is used where a fine level control is needed.
What is different between pressure safety valve and temperature safety valve?
Pressure safety valve-are the valve who are designed such that it can control the pressure , like in the water blowers etc,and Temperature safety valve are those who are used to regulate the temperature like, in water boilers.
What valves preffered in the upstream and downstream of a control valve ball valve or globe valve?
That would depend on the application such as high steam pressure and if throttling is needed
The purpose of a bypass valve in larger-size gate valves is to?
In an application of pressure reduction, the warm up valve (bypass valve) is used to warm the steam line, within recommended time frames, before the control valve is placed into operation. A steam control valve should not be used for warm up of a steam distribution line.
How do you convert the valve in the powerstroke turbo into a exhaust brake?
buy a Jake brake kit from banks or something
Why wold you have exhaust pressure in the valve cover pan on a Honda accord 1993?
Replace the PCV Valve.
How does a brake pressure control valve work?
the brake control valve is used to control the amount of hydrauic pressure form the hydraulic system to the brake system through the metering valve.
What is draft control?
A valve that brings atmospheric air into the furnace exhaust to help expel the exhaust gases.
What is furnace draft control?
A valve that brings atmospheric air into the furnace exhaust to help expel the exhaust gases.
What is a exhaust cam?
Exhaust cam, is the cam that control valve timing on a DOHC, (DUAL OVERHEAD CAM) motor.
Where is the egr sensor located on 7.3 powerstroke?
On a 7.3 Powerstroke, the EGR (Exhaust Gas Recirculation) sensor is typically located on the EGR valve assembly, which is situated on the driver's side of the engine, near the rear. The valve itself is mounted on the intake manifold, and the sensor is connected to it, helping to monitor the flow of exhaust gases recirculated back into the engine. For precise access, you may need to remove the heat shield or other components in the vicinity.
How does pressure control valve control the pressure?
Depends on what kind your talking about. It actually does not control it is a reducing valve by use of diaphragm and spring tension setting in most applications
Inlet exhaust valve what is it?
An inlet and exhaust valves are two separate things. The inlet valve lets the fuel/ air ,ix into the cylinder. The exhaust valve opens to let the pressure out after the mix has burned, releasing the gasses. Then the process starts over again.
What a pressure regulator valve?
A pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output.
What is the difference between valve and control-valve?
Control valve: Used to modify flow rate in a process control system.It has characterization: linear,equal percentage and quick opening Pressure inlet must be higher than the output pressure Regulator:Diapghram operating valve which controls outlet pressure (reducing application),control inlet pressure (back pressure) or either (differential reducing and differential relief applications
What parts of the car starts with e?
Engine,Emission Control System,EGR (Exhaust Gas Recirculation Valve),Exhaust system,ECM (Engine Control Module),
