The triangle on the clock input of a J-K flip-flop signifies that the flip-flop is edge-triggered, meaning it responds to changes in the clock signal at specific edges, typically the rising edge (transition from low to high). This edge-triggering allows the flip-flop to capture and change its output state based on the inputs (J and K) only at that precise moment, providing improved timing control in digital circuits.
flip flop:-> it work's on the basis of clock pulses.-> it is a edge trigerred , it mean that the output and the next state input changes when there is a change in clock pulse whether it may a +ve or -ve clock pulse.latch;-> it is based on enable function input-> it is a level trigerred , it mean that the output of present state and input of the next state depends on the level that is binary input 1 or 0.Both the flip-flop and latch are Sequential circuits....Flip flops are edge-triggered devices whereas latches are level triggered devices.latch does not have clock signal whereas flip flop does.Flip flop has two values while latch has only one value.A: A flip-flop can be set reset and pass date with a clock a latch is a two state switch of or onA flip flop will follow a clock a latch will remain status quo until it is unlatch. basically one does not use flip flop for latches and viceversa. both can be flip and latched by signals.
the electrical power triangle is as shown in the above pictiure
Delta (of a curve)
In the context of a clock, a "circuit" refers to the electronic pathway that enables the clock's components to function together. This includes the connections between the power source, timing mechanism, and display elements. The circuit ensures that signals are transmitted correctly, allowing the clock to keep accurate time and display it properly. Essentially, it forms the backbone of the clock's operation.
If you mean JFET, it is because the gate junction is reverse biased.
by combining j and k inputs we will get jk flipflop
The answer depends on what you mean by "mean of triangle". There is no such geometric term.
If you mean "triangle", a triangle can never have two parallel sides.If you mean "triangle", a triangle can never have two parallel sides.If you mean "triangle", a triangle can never have two parallel sides.If you mean "triangle", a triangle can never have two parallel sides.
what does the small hand on the clock mean
Triangle-ception.
blood clock
blood clock
flip flop:-> it work's on the basis of clock pulses.-> it is a edge trigerred , it mean that the output and the next state input changes when there is a change in clock pulse whether it may a +ve or -ve clock pulse.latch;-> it is based on enable function input-> it is a level trigerred , it mean that the output of present state and input of the next state depends on the level that is binary input 1 or 0.Both the flip-flop and latch are Sequential circuits....Flip flops are edge-triggered devices whereas latches are level triggered devices.latch does not have clock signal whereas flip flop does.Flip flop has two values while latch has only one value.A: A flip-flop can be set reset and pass date with a clock a latch is a two state switch of or onA flip flop will follow a clock a latch will remain status quo until it is unlatch. basically one does not use flip flop for latches and viceversa. both can be flip and latched by signals.
Input is when you type with the calculator
o'clock means of the clock.
in a triangle "IRH"
what does spanner mean next to milage clock julienray66@yahoo.co.uk