0
What else can I help you with?
How do you calculate copper wire resistance?
if we know resistivity of copper i.e is very small (1.68×10−8)transposing the definition to make resistance the subject (Pouillet's law):R is the electrical resistance of a uniform specimen of the material (measured in ohms, Ω) is the length of the piece of material (measured in metres, m)A is the cross-sectional area of the specimen (measured in square metres, m²).
What is the electrical resistance of a penny?
The electrical resistance of a penny can vary based on its composition and condition, but a typical copper penny (post-1982) has a resistance of about 1 to 2 ohms. This value can change due to factors like oxidation, surface condition, and temperature. Generally, the resistance is low due to copper's excellent conductivity.
From copper and manganin which has higher resistance?
The question is actually wrong, they can both have the same resistance if configured differently, the real question should be which has a higher resistivity which is the electrical resistance found in a standard amount of each material. In this case Manganin has a higher resistivity than copper.
The properties of a wire that would create the least resistance to electron flow?
Generally a larger diameter copper wire would create the least resistance to electron flow. Copper is the most conductive and is widely used.
Stretch a copper wire so that its thinner and the resistance between its end?
increases
How do you determine length of copper?
As the question is some what blind: However if the cross sectional area of the copper wire/rod is uniform, then we can find the length is we know the electrical residence between two ends. That is the concept of specific resistance is entering into picture to calculate the resistance then the length.
Does aluminum have lower resistance than copper?
No, aluminum has a higher resistance than copper.
What material has the lowest resistance plastic copper or wood?
Copper has the lowest resistance among plastic, copper, and wood materials. Copper is an excellent conductor of electricity compared to plastic and wood, which have higher resistance due to their insulating properties.
How does copper affect uranium?
Copper doesn't affect uranium.
Which material has a greater resistance aluminum or copper wire?
Copper wire has greater resistance than aluminum wire. This is because copper is a better conductor of electricity than aluminum. This means that copper wire will have less resistance and will be able to carry more current with less energy loss.
How do you calculate copper wire resistance?
if we know resistivity of copper i.e is very small (1.68×10−8)transposing the definition to make resistance the subject (Pouillet's law):R is the electrical resistance of a uniform specimen of the material (measured in ohms, Ω) is the length of the piece of material (measured in metres, m)A is the cross-sectional area of the specimen (measured in square metres, m²).
What are factors that affect resistance of electricity?
Factors that affect resistance of electricity include the type of material the wire is made of (e.g. copper vs. aluminum), the length of the wire (longer wires have higher resistance), and the cross-sectional area of the wire (thicker wires have lower resistance). Temperature also affects resistance, with higher temperatures typically leading to higher resistance.
What is the resistance value of 1 meter copper wire?
The resistance value of a 1 meter copper wire depends on its gauge (thickness) and temperature. For example, a 1 meter wire of 24-gauge copper has a resistance of about 25.67 ohms at room temperature. It is important to consider these factors when calculating the resistance of copper wire.
Three factors that affect the resistance of a copper wire -?
There are three main factors that affect the resistance of a copper wire: Length of the wire: The resistance of a wire is directly proportional to its length. As the length of the wire increases, the resistance also increases. This is because the longer the wire, the more obstacles (collisions with electrons) the current has to overcome, resulting in higher resistance. Cross-sectional area of the wire: The resistance of a wire is inversely proportional to its cross-sectional area. As the cross-sectional area of the wire increases, the resistance decreases. This is because a larger cross-sectional area provides more space for the flow of electrons, reducing the resistance. Resistivity of the material: The resistance of a wire is also dependent on the resistivity of the material it is made of. Resistivity is an inherent property of the material and is a measure of how much the material opposes the flow of electric current. Copper has a relatively low resistivity compared to other metals, making it a good conductor and suitable for wiring applications. The relationship between these factors and the resistance of a copper wire can be expressed by the formula: R = ρ × (L / A) Where: R is the resistance of the wire ρ (rho) is the resistivity of the material (in this case, copper) L is the length of the wire A is the cross-sectional area of the wire By adjusting these three factors, you can control and manipulate the resistance of a copper wire to suit your specific needs in electrical and electronic applications.
What happen to the resistance of a copper when it is heated?
As copper is heated, its resistance increases. This is due to the increase in collisions between free electrons and copper ions, hindering the flow of electric current through the material.
What copper wire would have the highest resistance?
A thicker copper wire will have higher resistance as it will offer more opposition to the flow of electrons compared to a thinner wire. Additionally, a longer copper wire will have higher resistance compared to a shorter wire due to increased distance for the electrons to travel. Finally, a copper wire with impurities or defects will have higher resistance than a pure copper wire.
Can copper and alluminium wire of same length and diameter have same resistance?
No, copper and aluminum wire of the same length and diameter will not have the same resistance. Copper has a lower resistivity than aluminum, so a copper wire will have lower resistance compared to an aluminum wire of the same length and diameter.
