0
I first asked the question. I was told by an electrical engineer that the appliances would breakdown after between 1 day and 2 weeks use and he advised me to sell and buy new appliances in the Philippines. I was not able to obtain a reasonable price for selling second hand appliances and also found that appliances in the Philippines were very expensive compared to Malaysia. I was also told in the Philippines that the appliances would work satisfactorily . So I installed all the appliances and after 3 months they work OK except the clock which gains about 3 hours per day.My appliances include 2 refridgerators. 2 wine coolers, freezer.4 TV's,washing machine ,dryer,dishwasher,computer,fax ,etc. David dlw@tm.net.my
What else can I help you with?
What is the power dissipation for TTL?
power dissipation of a logic circuit is usually defined as the supply power required for the gate to operate with a 50% duty cycle at a specific frequency.
If a load takes 50 kW at a power factor of 0.5 lagging Calculate the apparent power and reactive power?
If a load takes 50 kW at a power factor of 0.5 lagging calculate the apparent power and reactive power Answer: Apparent power = Active power / Power Factor In this case, Active power = 50 kW and power factor = 0.5 So Apparent power = 50/0.5 = 100 KVA
What determines leading or lagging power factor?
underdampedAnswerA lagging power factor describes a situation in which the load current is lagging the supply voltage. This describes an inductive load, such as a motor, etc.
Can you use a 60Hz variac in a 50 Hz outlet?
Yes, you can use a 60Hz variac in a 50 Hz outlet. However, since the frequency is less, the current and power dissipation will be greater, making the efficiency less. It will not carry its rated load.
If a bulb has 50 Hz frequency and it is apply at 60 Hz frequency voltage supply then it is glow or not?
If a bulb has 50 Hz frequency and it's supply is 60 Hz frequency, it will still glow, despite the allowance of 10 HZ frequency.
What happens to a 220v 50hz stereo amplifier when connected to a 220v 60hz supply?
Nothing happens. The stereo has a transformer that converts the power to DC, and 50 or 60 Hz input makes no difference.
What type of wire should I use for my RV that requires a 50 amp power supply?
For an RV that requires a 50 amp power supply, you should use a 6-gauge wire.
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
What are the release dates for 50 Cent The Money and the Power - 2008 Move from Demand to Supply 1-8?
50 Cent The Money and the Power - 2008 Move from Demand to Supply 1-8 was released on: USA: 2 January 2009
Is there any difference in the consumption of electricity by using two sizes of power supply for example a 350watt power supply and a 480watt power supply with all else being the same on the comp?
The computer will only consume what power it needs. No diffference. if you have a 350watt power supply, and it is using more then 70% power consuption, the life of that power supply will be short, so always aim big when picking out a power supply, ie: 50-100 watts more than what you would actually need.
Can you operate a motor of 575 v 60 Hz with a power supply of 575v 50 Hz?
Operating a motor designed for 60 Hz on a 50 Hz power supply can lead to issues such as overheating and reduced efficiency. It's recommended to use a motor that matches the frequency of the power supply for optimal performance and to prevent damage to the motor. In this case, it's best to avoid operating a 575 V 60 Hz motor on a 575 V 50 Hz power supply.
What is the power dissipation for TTL?
power dissipation of a logic circuit is usually defined as the supply power required for the gate to operate with a 50% duty cycle at a specific frequency.
Types of AC-DC power supply?
Answer for countries in Europe and other world areas running a 50 Hz supply service.AC power supply is 230 v supply used in our homes for switching on fans, bulbs etc. where as DC power supply is used for switching on our laptops, charging our mobiles phones, i pods etc.
How much to replace fluorescent ballast?
The cost to replace a fluorescent ballast typically ranges from $50 to $100, including the cost of the ballast itself and labor for installation. It's recommended to hire a professional electrician to ensure the job is done safely and correctly.
How do you replace a computer fuse?
The only fuse located in a computer is the one in the power supply. It can be very dangerous to open a power supply without proper training. If you do not have the requisite training to repair a power supply, please do not attempt to open it. Your life isn't worth losing over a $50 hunk of metal and wires.
What happens when a 120 volt Wii is plugged into 110 volt socket?
If the power supply is 60 Hz AC, and the Wii says 60 Hz, there is no problem. The built-in transformer provides DC power to the electronics. Do not try to use a Wii designed for a 50 Hz system at a higher voltage.
What is the power voltage in Indonesia?
Since 1998, the standard mains supply throughout Indonesia is 230 volts, 50 Hz.
