the light bulb gives off more light
In a series circuit, on the way from the positive to the negative power terminals, there is only one path for current to take from any point. If there is a point anywhere in the circuit where the current has a choice of two or more paths to take, then that segment at least is a parallel segment.
Series circuit: one path. Parallel circuit: One path for each branch (two or more).
if the circuit is a series circuit (all loads wired in a single line , one after the other ) then the current will be the same in any part of the circuit . if there are several different paths for the current to take , then each path will carry a different percentage of the total current . when each of these different current values are added together , they will equal the total supplied current.
To create a combined series and parallel circuit with a fuse, first arrange some components (like resistors) in series, connecting them end-to-end. Then, take one or more of those series components and connect them in parallel with the fuse placed in series with the entire setup to protect the circuit. Ensure the fuse is rated appropriately for the total load of the circuit, providing a safeguard against overcurrent. Finally, connect the power source to the circuit and test it for functionality.
electricity take every possible path which follow closed path across its source.AnswerIn a series circuit, there is only one path for current to flow; the same current passes through each component.In a parallel circuit, there are multiple paths called 'branches', and the sum of the individual branch currents is equal to the current drawn from the supply.
connect a register in series with line and take the voltage at the register terminal if circuit is close.
In a series circuit, the current has only one path to take.
So is your home. So are factories, offices, etc.In a parallel circuit, the voltage is predictable. All items are subject to the same voltage - in a serial circuit, on the other hand, the voltage even depends on OTHER elements in the same circuit, so that gets rather messy. Also, in a parallel circuit, you can turn individual consumers (e.g., lamps) on and off, independently from one another.
A series circuit is one in which there is only one possible route for current to follow on its trip from one terminal of the power supply to the other terminal. If there is any point in the circuit where the current has a choice of which fork to take, then there is at least one section of the circuit that is not in series.
Both take current and energy from the power supply and dissipate power.
The essential difference between a series circuit and a parallel circuit is the way in which the components are physically connected. In a series circuit there is just a single path that electricity can take, whereas in a parallel circuit there are two or more different paths.
In a series circuit, on the way from the positive to the negative power terminals, there is only one path for current to take from any point. If there is a point anywhere in the circuit where the current has a choice of two or more paths to take, then that segment at least is a parallel segment.
Series circuit: one path. Parallel circuit: One path for each branch (two or more).
Current in a series circuit travels in one path. This is because a series circuit is only one path. current in a series circuit stays the same thoughout the circuit this means that if in the beginning of the circuit there are 2 amps of current there will be the same ammount of current in the middle and in the end of it. if you don't understand this please tell me and ill explain in a better way.
Protect the circuit with an OCPD, an over current protection device, such as a circuit breaker or fuse.
Current. There is only one path that current can take through the circuit, so the current must be the same at every point.
if the circuit is a series circuit (all loads wired in a single line , one after the other ) then the current will be the same in any part of the circuit . if there are several different paths for the current to take , then each path will carry a different percentage of the total current . when each of these different current values are added together , they will equal the total supplied current.