The circuit becomes a pure resistance circuit where current and voltage are in phase with each others.
Bypass capacitors are used to bypass (shunt) unwanted signals to the ground. A common use is in power supplies where a bypass capacitor is connected in parallel with the main filter capacitor to shunt noise and other high frequency interference to ground which the main capacitor may not be able to do.
we can use the Out Put Capacitor Ex Kvar
Emitter bypass capacitor is a capacitor which provide low impedance to AC and high impedance to DC . AC is shunt then only DC appears on RC and volage gain increses.
When checked with an ohmmeter, a properly functioning capacitor should initially show a low resistance as the capacitor charges, but then the resistance should increase rapidly to a very high value or infinity as it becomes fully charged. This behavior indicates that the capacitor is not shorted and is capable of holding a charge. If the ohmmeter indicates a constant low resistance, the capacitor may be faulty or shorted. Conversely, if it shows an infinite resistance immediately, the capacitor might be open or defective.
The capacitor is called a bypass capacitor , it provides a low impedence path for AC emitter current to groun.
Then gain becomes equal to hFe and thermal runaway becomes a problem. Further, the reduction of gain as frequency decreases is eliminated, so the stage's operation as a high pass filter is compromised.
Bypass capacitors are used to bypass (shunt) unwanted signals to the ground. A common use is in power supplies where a bypass capacitor is connected in parallel with the main filter capacitor to shunt noise and other high frequency interference to ground which the main capacitor may not be able to do.
Without a bypass capacitor it is just equal to Rc
it would get a lot of voltage
we can use the Out Put Capacitor Ex Kvar
if it is a capacitor start and run motor, this is because of shorted capacitor
If a bypass capacitor is used the voltage drop across emitter resistance is reduced which in turn increases the gain.....
A shorted capacitor is one where the gap between the plates is damaged, and the plates are touching each other, creating a short circuit.
Emitter bypass capacitor is a capacitor which provide low impedance to AC and high impedance to DC . AC is shunt then only DC appears on RC and volage gain increses.
When checked with an ohmmeter, a properly functioning capacitor should initially show a low resistance as the capacitor charges, but then the resistance should increase rapidly to a very high value or infinity as it becomes fully charged. This behavior indicates that the capacitor is not shorted and is capable of holding a charge. If the ohmmeter indicates a constant low resistance, the capacitor may be faulty or shorted. Conversely, if it shows an infinite resistance immediately, the capacitor might be open or defective.
to bypass current and charge and discharge current
The capacitor is called a bypass capacitor , it provides a low impedence path for AC emitter current to groun.