0
a transformer require AC to function as desired it transform the AC to different levels. DC on a transformer can only see the actual primary or secondary resistance if the source is not limited in current it will burn the transformer by excessive heating since it will see only wire resistance.
Answer 2
the application of an AC voltage, V on one winding of the transformer produces alternating flux that links the entire core of the transformer. The changing flux induces an emf, E that opposes the main voltage. the current through the winding in this case is {(V-E)/R}; R= winding resistance
in case of application of DC, since there is no changing flux, there is no induced emf and hence the current will be V/R
since the resistance of the winding is very small, the current is very high and this can burn away the windings. hence DC is not used.
What else can I help you with?
If a dc voltage of 12v is added to the secondary of step down transformer and rating of transformer is 220 input and 12v output what will be the result from primary of transformer?
Adding a DC voltage to the secondary of a transformer will not have an effect on the primary side, as transformers work on the principle of electromagnetic induction which is based on alternating current. The primary side of the transformer will still operate based on the input AC voltage of 220V. The DC voltage on the secondary side will not be transferred to the primary side.
Can you step up or step down the DC voltage by a transformer?
You need alternating current for a transformer, for DC you would have to interrupt the power supply to make it effectively DC pulses.
Does electrical transformer use a DC or AC source?
A transformer is a device to convert high voltage AC to low voltage AC & vice-versa. It works on the principle of induction. Since induction occurs only in an AC supply, a transformer cannot work on DC.. So, it is not possible to convert DC supply to AC using transformer. You would need an inverter to convert DC to AC.
What happens if dc supply is connected to incomer of transformer?
If a DC supply is connected to the incomer of a transformer, you effectively have a short circuit, because the DC impedance of a transformer (actually, any inductor) is quite low. You will blow something.
Why transformers are not excited with dc?
by using step-up transformer we can change the voltage in higher level
How do you make ac into DC in a ac transformer?
You can not change AC into DC using a transformer. A transformer changes the voltage levels. To change AC into DC, you would need a rectifier. To change that into smooth DC you need a capaciter and a voltage regulater
What happens if a dc supply is given to a transformer under no load?
when dc supply is given to transformer at primary winding , the output at secondary winding will be zero.Because to induce voltage ,countnie changing flux is required ,that can not be obtained from dc supply...........
Can a constant dc current can induce a steady state voltage in a transformer?
No, the current has to change for a voltage to be induced in the transformer.
If a dc voltage of 12v is added to the secondary of step down transformer and rating of transformer is 220 input and 12v output what will be the result from primary of transformer?
Adding a DC voltage to the secondary of a transformer will not have an effect on the primary side, as transformers work on the principle of electromagnetic induction which is based on alternating current. The primary side of the transformer will still operate based on the input AC voltage of 220V. The DC voltage on the secondary side will not be transferred to the primary side.
Can a constant dc current induce a steady state voltage in a transformer?
No. A constant DC current of sufficient magnitude induces smoke in a transformer.
Why is a high dc voltage applied to a transformer for testing?
A high dc voltage would be applied to test the insulation between the windings.
Can you step up or step down the DC voltage by a transformer?
You need alternating current for a transformer, for DC you would have to interrupt the power supply to make it effectively DC pulses.
In D.C supply the transformer is not connected why?
In a DC power supply a transformer is connected. The only time there would be no transformer used would be if the DC voltage wanted was 120 VDC. The transformer in the power supply is connected to 120 VAC on the primary side and the secondary side of the transformer is connected to either a half wave or a full wave diode bridge. The voltage out of the diode bridge will be the same output voltage potential as the transformer's secondary voltage but it will be a DC (Direct Current) potential.Reading the question in another way, transformers are not connected in a DC circuit. The reason being is that the transformer operates on a collapsing magnetic field. This field induces a voltage into the secondary side of the transformer. Since the DC circuit does not operate on the principle of a collapsing field except when the circuit is opened, the transformer would not operate as a transformer should..
What is the conditon to connect a DC supply in primary of transformer?
Dc voltage level should not exceed the current carrying capacity of the winding. since winding resistance is very small. We need to be careful in giving the dc voltage to transformer winding.
How do car battery chargers work?
The first stage of a battery charger is simply a transformer, this reduces the mains voltage to 6, 12, or 24 Volts AC. This AC voltage is then fed through a Bridge Rectifier, which converts the AC voltage to DC for the battery
Does a transformer convert AC to DC?
No, a transformer does not change AC to DC. For this purpose there is a device known as a rectifier, and to transform it back to AC from DC you'll need an inverter. Transformers are only useful with AC due to the alternating waveform which induces a voltage in the secondary winding (when it is connected to a load).
Why we used ac volt in supply line instead of dc volt?
AC voltage is more sufficient than DC voltage. Moreover, an AC transformer can be developed but DC voltage will make it harder. Without a transformer, we cannot turn the high and low voltaged into each-other.
