0
What else can I help you with?
Why there is a clipping in the signal output when you change the attenuation from 20db to 0 db in function generator?
A: Clipping only occurs if the input surpasses a threshold like the Vbe of a transistor. The 20 Db is really a change3 in voltage of a 100 that is not a small change
Loading effect in RC coupled amplifier?
Loading of Rc coupled amplifier occurs, if you doesnt use coupling capacitors...... If avoiding input coupling capacitor the amplifier will load the function generator.. For more details go to http://mycircuits9.blogspot.com
If the variable dc power is reversed how does this effect the clipping?
Reversing the DC power supply polarity can significantly affect clipping in a circuit. Clipping occurs when the output signal exceeds the power supply limits, leading to distortion. If the DC power is reversed, the circuit may clip the negative half of the waveform instead of the positive half, altering the signal's characteristics and potentially damaging components designed for a specific polarity. This reversal can also impact the overall performance and reliability of the circuit.
What happens if single phasing occurs when a motor is running?
motor stops
What input value will give a nil voltage across the output?
A nil voltage across the output typically occurs when the input value is at a specific threshold that causes the output to be zero. For example, in a simple linear circuit, if the input is equal to the reference voltage or ground level, the output may be zero. Additionally, in operational amplifiers configured as comparators, a nil output voltage is achieved when the non-inverting input equals the inverting input. Thus, the exact input value for a nil output depends on the specific circuit configuration.
In which amplifier occurs Maximum distortion?
CLASS -C amplifier is having high ditortion due to which they are not used in audio frequency work
Does laser clipping occur in an optical transmitter or a optical receiver?
Laser clipping primarily occurs in an optical transmitter. It happens when the input signal to the laser exceeds the maximum output level that the laser can produce, leading to distortion and a nonlinear response. This can result in signal degradation and loss of information integrity. In contrast, optical receivers generally deal with signal detection and amplification rather than generating light, so clipping is not a relevant issue in that context.
What is clipping levels?
Clipping levels refer to the thresholds in audio processing that determine the maximum amplitude of a sound signal before distortion occurs. When the signal exceeds these levels, it can result in clipping, where the peaks of the waveform are "clipped" off, leading to a harsh, distorted sound. Properly setting clipping levels is crucial in audio production to maintain sound quality and prevent unwanted distortion.
Why there is a clipping in the signal output when you change the attenuation from 20db to 0 db in function generator?
A: Clipping only occurs if the input surpasses a threshold like the Vbe of a transistor. The 20 Db is really a change3 in voltage of a 100 that is not a small change
Loading effect in RC coupled amplifier?
Loading of Rc coupled amplifier occurs, if you doesnt use coupling capacitors...... If avoiding input coupling capacitor the amplifier will load the function generator.. For more details go to http://mycircuits9.blogspot.com
Why is laser an example of clipping?
Laser is an example of clipping because it represents a specific instance of a broader category of light sources. The term "laser" is derived from the acronym Light Amplification by Stimulated Emission of Radiation, and it is often used in a shortened form. Clipping occurs when a longer term is shortened into a more manageable form for ease of use, exemplifying how language evolves for convenience.
What is another name for occurs?
another word for occurs is happens.
What happens when thunder occurs?
nothing happens its just a sound.
How do you spell happens or occurs?
The correct spellings are 'happens' and 'occurs'.
What happens when competition occurs?
heey
Bending and breaking occurs when this happens?
shearing
What happens when the lungs recoil?
Expiration occurs.
