0
If a resistor does not have a gold or silver band, it typically indicates that the resistor does not have a specified tolerance, suggesting it could be either a low-precision resistor or designed for specific applications where tolerance is not critical. Alternatively, it may also be a non-standard resistor where the color coding is not applicable. In such cases, one might need to refer to the manufacturer's specifications or use a multimeter to measure the resistance value directly.
What else can I help you with?
How can you find a resistance of resistor without DMM explain the method with the help of example?
Hi You can find the value of the resistor by using colour code printed on the resistor. 1. Hold the resistor such that the colour code starts from left. 2. Each of the colour bands present on the resistor specifies a value. 3. The first colour band represents the first significant figure, the second band represents the second significant figure and the third band indicates the multiplier. The fourth band represents the tolerance. Gold band- 5%, Silver band-10%, No band-20% 4.Find the appropriate values for the colour by using the chart 1. 5. Find the value of the resistor by using the formula 1. Chart1 Example: Here first band represent brown. Second band represent black. Third band represent red . Fourth band represent gold. The value of resistor = 10 x 102 ± 5% = 1kΩ ± 5%
How do you identify carbon resistor using colour code?
To identify the value of a carbon resistor using colour code use the following table...0 - Black1 - Brown2 - Red3 - Orange4 - Yellow5 - Green6 - Blue7 - Violet8 - Grey9 - White... and look at the bands. The first two bands will be the digits, and the third band will be the multiplier. For instance, Brown - Red - Orange will be 12000 ohms, where the 1 is the first band, the 2 is the second band, and the three 0's is the third band.If the third band is Gold or Silver, then the multiplier is 0.1 or 0.01 respectively. For instance, Brown - Red - Gold would be 1.2 ohms, and Brown - Red- Silver would be 0.12 ohms.If there is no fourth band, the resistor is +/- 20%. If the fourth band is Silver, the resistor is +/- 10% and, for Gold, +/- 5%.Some high end resistors have more bands. The 1% resistor will have a third digit band, and some resistors will have a band indicating temperature coefficient.
What do the first 3 bands on a resistor indicate?
The first 3 band on a resistor indicate the value of that resistor.
What is the 4th colour band on a resistor?
yes
How do you calculate resistor colour code?
To calculate a resistor's value using its color code, first identify the colors of the three or four bands on the resistor. Each color corresponds to a specific number (or multiplier for the third band) based on a standard color code chart. For a four-band resistor, the first two bands represent significant digits, the third band is a multiplier (10 raised to the power of the digit), and the fourth band indicates tolerance. Multiply the first two digits by the value of the third band to find the resistance in ohms.
What are the color codes on a 47 Ohm resistor with a tolerance of 5 percent?
On a standard four band resistor: yellow, violet, black, and gold.
What is the value in ohms of a resistor colored brown red yellow gold?
The first band, brown, indicates the digit 1.The second band, red, indicates the digit 2.The third band indicates the multiplier. For yellow, this is 10000.12x10000 = 120,000 ohms.The last band is an indication of the tolerance of the resistor; gold means the actual value is within 5% of the stated value.
What value is resistor that is colored white white white brown?
When a resistor has a 4th color band, its color is either gold or silver, so I will assume the color bands are white-white-white-gold. The resistance is 99 GΩ ± 5%.
How can you find a resistance of resistor without DMM explain the method with the help of example?
Hi You can find the value of the resistor by using colour code printed on the resistor. 1. Hold the resistor such that the colour code starts from left. 2. Each of the colour bands present on the resistor specifies a value. 3. The first colour band represents the first significant figure, the second band represents the second significant figure and the third band indicates the multiplier. The fourth band represents the tolerance. Gold band- 5%, Silver band-10%, No band-20% 4.Find the appropriate values for the colour by using the chart 1. 5. Find the value of the resistor by using the formula 1. Chart1 Example: Here first band represent brown. Second band represent black. Third band represent red . Fourth band represent gold. The value of resistor = 10 x 102 ± 5% = 1kΩ ± 5%
What is the value of a red red orange and gold resistor?
A resistor with the color bands red, red, orange, and gold has a value of 22,000 ohms (or 22 kΩ). The first two red bands represent the digits 2 and 2, the orange band indicates a multiplier of 1,000 (10^3), and the gold band signifies a tolerance of ±5%.
A resistor is marked with the following color bands brown black red and gold What is the resistance of this resistor?
1000 ohms = 1Kohm; silver is the tolerance band of the resistor. Silver signifies plus or minus 10%. The fourth band is always the tolerance band. If there is no tolerance band, the tolerance is plus or minus 20%. A gold band would signify plus or minus 5%.
How do you identify carbon resistor using colour code?
To identify the value of a carbon resistor using colour code use the following table...0 - Black1 - Brown2 - Red3 - Orange4 - Yellow5 - Green6 - Blue7 - Violet8 - Grey9 - White... and look at the bands. The first two bands will be the digits, and the third band will be the multiplier. For instance, Brown - Red - Orange will be 12000 ohms, where the 1 is the first band, the 2 is the second band, and the three 0's is the third band.If the third band is Gold or Silver, then the multiplier is 0.1 or 0.01 respectively. For instance, Brown - Red - Gold would be 1.2 ohms, and Brown - Red- Silver would be 0.12 ohms.If there is no fourth band, the resistor is +/- 20%. If the fourth band is Silver, the resistor is +/- 10% and, for Gold, +/- 5%.Some high end resistors have more bands. The 1% resistor will have a third digit band, and some resistors will have a band indicating temperature coefficient.
In which of the following were all debts paid in Massachusetts?
gold and siver
What do the first three bands help determine on a resistor?
The first three bands on a resistor tell you what its resistance is. The first band is the first digit, the second band is the second digit, and the third band is the number of zeros to add. Use the resistor color code to convert... 0 Black 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue 7 Violet 8 Grey 9 White As an example, a 27000 ohm resistor would be Red - Violet - Orange. If the third band is Silver, the multiplier is 0.1 and, if the third band is Gold, the multiplier is 0.01. For example, a 0.39 ohm resistor would be Orange - Gray - Gold.
What did the Aztecs do when they first saw the Spanish?
Gave them one gold and siver plate
What do the first 3 bands on a resistor indicate?
The first 3 band on a resistor indicate the value of that resistor.
Can you replace a 5 band resistor to a 4 band?
yep
