Nothing about a series circuit is necessarily constant.
You may be thinking of the current, which is the same number at any point in a series circuit.
That doesn't mean that it can't change. But if it does change, it'll change at every point, and
still be the same number everywhere in the series circuit.
Normally, but if the circuit has capacitors this is not necessarily true.Another viewpoint:No. The current doesn't have to be constant in a series circuit, It can grow, shrink,wax, wane, switch on, switch off, or wander randomly about. But whatever it is,it must be the same at all points in the series circuit.
The lamps will get dimmer. In a parallel circuit, voltage is constant. Whereas, in a series circuit, amps are constant.
A resistor by itself has no time constant. For a circuit to have a time constant it must contain either capacitors or inductors.
current
Ohm's Law answers your question. Voltage = Current x Resistance. In a series circuit you are in effect adding resistance. If the Voltage remains constant then the answer is obvious looking at the equation above.
The time constant of an RL series circuit is calculated using the formular: time constant=L/R
In a series circuit, the current remains constant throughout the circuit. The voltage across each component in a series circuit adds up to the total voltage of the circuit.
In a series circuit the current remains constant at any point while the voltage drops across each resistive element.
by adding the the resistances in series the total resistance of the circuit increses and thus the crunt flowing in the circuit decrese. Ans 2 . the current in series circuit of constant resistance will always be the same . It will not effect the current .
In a series circuit, the current (amps) is constant throughout the circuit. This means that the same amount of current flows through each component connected in series. The current is not divided or reduced as it travels through the circuit.
Normally, but if the circuit has capacitors this is not necessarily true.Another viewpoint:No. The current doesn't have to be constant in a series circuit, It can grow, shrink,wax, wane, switch on, switch off, or wander randomly about. But whatever it is,it must be the same at all points in the series circuit.
The phase shift angle of an RLC circuit is constant for a constant frequency, but changes with different frequencies.The phase angle of the AC in the RLC circuit is however continuously changing. Otherwise it wouldn't be AC.
The lamps will get dimmer. In a parallel circuit, voltage is constant. Whereas, in a series circuit, amps are constant.
current is constant in the series circuit. The resistances of the components add up and the potential differences is divided propotionally over the components depending on their resistances.
A resistor by itself has no time constant. For a circuit to have a time constant it must contain either capacitors or inductors.
current
Current. There is only one path that current can take through the circuit, so the current must be the same at every point.