answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

How to test plumbing trap?

Turn on the the water to the fixture. And let in run.


Increase hot water pressure?

You cannot increase hot water pressure only. If this is low, your tank may need cleaning - You first turn OFF the power to tank, then attach a hose pipe to the bottom fitting, lead it outside or to any drain, turn on the valve by it, turn OFF your inlet valve and open the relief valve so air can enter the H/W tank.Let the whole tank empty -takes about 30 -40 minutes. Next, when empty turn ON the inlet valve and let cold water run through the tank and out the hose, now you will see the sludge coming out. Let this run 5-7 minutes or until water is coming through clean. Now you are done . Let it fill, then turn on power.


Do you need to replace hot water heater if the bottom of the heater is rusted?

If not leaking and water heater is working fine, no.Improved answer. -Drain and clean out your tank, and change the anode.Drain a H/W tankYou first turn OFF the power to tank, then attach a hose pipe to the bottom fitting, lead it outside or to any drain, turn on the valve by it, turn OFF your inlet valve and open the relief valve so air can enter the H/W tank.Let the whole tank empty -takes about 30 -40 minutes. Next, when empty turn ON the inlet valve and let cold water run through the tank and out the hose, now you will see the sludge coming out. Let this run 5-7 minutes or until water is coming through clean. Now you are done . Let it fill, then turn on power.


How can you tell it's an interference engine or If it's a non-interference engine?

If you give the yr/make/model/engine, could let you know... But if you want to find out your self. You need to turn piston 1 to TDC and depending on the engine, undo the valve spring keeper and measure how far the valve drops until in hits the piston. Subtract .050 of an inch and if it is less than the max valve lift you have an interference engine.


What is the meaning of do not let your mouth overload your butt?

The phrase "do not let your mouth overload your butt" is a colloquial expression that warns against making promises or commitments that one cannot fulfill. It suggests that one should be cautious about speaking too boldly or taking on more than they can handle, as this can lead to negative consequences. Essentially, it encourages individuals to think before they speak and to be mindful of their capabilities.

Related Questions

How do transplant a cactus?

Carefully. If you need to handle it out of its pot fold a sheet of newspaper up and use it wrapped round the plant to let you handle it.


What is a good sentence for the word dangerous?

You should never let a toddler handle a knife by him/her self because it is very dangerous.


What are some of the spirituals sung in Selma Lord Selma?

Ain't going to let nobody turn me round.


How do you reverse a capias warrant in nh?

Contact the court that issued it or turn yourself in. If you are represented by counsel, let them handle it.


BMW 318i and it let you unlock it put key in and got ignition lights butdoes not turn the key just spins round and round what could cause this please?

Broken switch, replace it.


When was Let's Polka 'Round created?

Let's Polka 'Round was created on 2003-08-26.


What was the most important song of the civil right movement?

Oh, there were tons! But one of the most famous is "Ain't Gonna Let Nobody Turn Me Round."


When was Let's Go Round Again created?

Let's Go Round Again was created in 1997-11.


Should kassie let mom handle this situation?

yes she should. if she doesnt let her handle it something bad is gonna happen.


What is green round light on 2000 Jeep grand?

If it is the light in the gauge console, it is to let you know the headlights are on automatically. Like when the windshield wipers are on, or that its dark enough to have them turn on.


What were the terms of the understanding between orpheus and Hades?

Hades promised to let Eurydice return, if on the trip Orpheus would not turn round before reaching his own home.


Who wrote Ain't going to Let Nobody Turn Me Round?

sweet honey rock is who i was told to have had this song made. i believe it is them who made it though because i heard them sing it.