answersLogoWhite

0

A B check in a generator refers to a scheduled maintenance inspection that typically occurs at regular intervals, often after a specific number of operating hours. This check includes tasks such as inspecting and cleaning components, checking fluid levels, and testing electrical systems to ensure optimal performance and reliability. The B check is less comprehensive than an A check but still critical for maintaining the generator's functionality and longevity. Regular B checks help prevent unexpected failures and costly repairs.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Continue Learning about Engineering

What is the probable cause for no voltage generated in a DC compound generator?

In any DC generator the causes to fail to produce voltage is loss of residual flux in the field or fields , poor brush contact in the commutator(clean the brushes and commutator) , check all the terminals of the generator and voltmeter may not be functioningand lastly check the coupling and the prime mover is rotating.


What is the operating temperature for the 1500 kva diesel generator?

The operating temperature for a 1500 kVA diesel generator can vary depending on the specific model and manufacturer. It is important to check the manufacturer's specifications for the specific generator model to confirm its exact operating temperature range.


How do you troubleshoot generator that fails to supply ac voltage?

You first use the schematic diagram in the equipment service manual to understand the flow of the power and signals in the generator. The first thing to check is all of the power supply voltages. If one is missing, the generator can fail in such a way as to produce no output. Then you can use an oscilloscope to trace the problem backwards, from the output connector of the generator to to the source of the signal generation.


When using an ohmmeter to check the continuity of generator field coil the field coil should?

Read less than 1 ohm


Your volt meter shows your generator is producing 145 volts will it damage your electrical equipment?

Yes it coudl damage equipment. Check voltage rating on equipment. However, there should be an adjustment somewhere on the generator to set the voltage properly. Also make sure your meter is calibrated. Check a known voltage source such as an outlet and compare readings.

Related Questions

Which is NOT part of an AC generator?

b. crank


Can you check the accuracy of the fractional number generator?

Yes, I can verify the accuracy of the fractional number generator.


How do you tell generator on 1983 Honda gl 1100 works or not?

Start the generator and check the voltage output at the receptacles on the generator with an AC volt meter.


Why isn't my home power generator working?

check all parts of your generator accordance to release the fault. there may be some difficulties to remove your generator fault because your generator details are not available.


Do I have to be insured to rent a generator from an industrial generator rental company?

Most companies won't require insurnace. Check with your rental company for details.


Where can I find generator reviews?

A good place to check for generator reviews is on the Generator Reviews at Electric Generators Direct website. They have many reviews for many products. Here is the website: http://www.electricgeneratorsdirect.com/reviews.php


A home generator puts out enough power to run how many applincesat a time?

Not all generators have the same output. Check the manual that came with your generator.


Where can I buy a small generator?

You can most definitely find a small generator at a hardware store. If they don't have any you can always check Wal Mart they have everything!!!!!!!!!


How do you switch between two modes in BASIC?

If a+b lasden a-b do ( a+b-5)and check a lasden b do a/b-(a+b) or do b/a+(a-b) other wise do (a-b+5) and check b morden then do b/a+(a-b)or do a/b-(a+b)?


How do you generate a parity check matrix?

In order to generate the parity check matrix you must first have the generator matrix and the codeword to check and see if it is correct. 1. Place your generator in row reduction form 2. Get the basis vectors 3. Put the vectors together to get the parity check matrix 4. Check it b multiplying the codewords by the parity = 0 For an example: 2*4 Generator Matrix [1 0 1 1 0 1 1 0] Rank = 2...therefore the number of columns is 2...Rank + X = # of columns of the Generator matrix v1+v3+v4 = 0 v2+v3 = 0 v1 = -r1-r2 v2 = -r1 v3 = r1 v4 = r2 Parity = [-1 -1 -1 0 1 0 0 1]


How do you check addititon with subtraction?

a + b = c To check if c is correct, subtract by either a or b , and you should get b and a respectively: a = c - b b = c - a


What does a dashpot check valve do and if its bad will it cause your generator to not run right NH5200?

A dashpot check valve controls the flow of fuel in a carburetor. If it is bad, it can cause issues with fuel delivery and negatively impact engine performance, potentially leading to the generator not running properly. It's best to have the dashpot check valve inspected and replaced if necessary to ensure the generator operates smoothly.