couplings are used to join sections of long transmission shafts. couplings are also used to connect the shaft of a driving machine to the shaft of a separately built machine so as to give an effect of continuous shaft.
the general classification of couplings is as given under:
1. rigid coupling
2. flexible coupling
3.Camlock coupling
control coupling content coupling common coupling data coupling external coupling message coupling
There are many like flexible coupling, jaw coupling, sleeve coupling, tire coupling, pin and bush coupling, rigid coupling, etc
no.transformer coupling gives higher gain
Direct coupling
Low coupling
control coupling content coupling common coupling data coupling external coupling message coupling
There are many like flexible coupling, jaw coupling, sleeve coupling, tire coupling, pin and bush coupling, rigid coupling, etc
transformer coupling
rc coupling is a coupling that involves capacitor aand resistor
no.transformer coupling gives higher gain
Direct coupling
1)rc coupling 2)transformer coupling 3)direct coupling
Content coupling
· Gruvlok Coupling
yes,i think so.
coupling is a computer program, which is meant for the maintenance of the cohesion , coupling is inversely proportional to cohesion. When coupling and cohesion is combined then it acts as support to the high readability and maintainability of a computer program.
RC COUPLING :- is the most Commonly used Coupling Between the two stages of a cascaded or multistage amplifier because it is cheaper in cost and Very compact circuit and provides excellent frequency response. TRANSFORMER COUPLING :- Impedence Coupling results in more efficient amplification because no signal power is wasted in Inductor L. Such Coupling has the drawback of being larger, Heavier and Costlier than the RC COUPLING. Impedence Coupling is rarely used beyond audio range . by : Muhammad zubair.... muet student of telecom.